Skip to main content

Probing the applicability of autotransporter based surface display with the EstA autotransporter of Pseudomonas stutzeri A15

Abstract

Background

Autotransporters represent a widespread family of secreted proteins in Gram-negative bacteria. Their seemingly easy secretion mechanism and modular structure make them interesting candidates for cell surface display of heterologous proteins. The most widely applied host organism for this purpose is Escherichia coli. Pseudomonas stutzeri A15 is an interesting candidate host for environmentally relevant biotechnological applications. With the recently characterized P. stutzeri A15 EstA autotransporter at hand, all tools for developing a surface display system for environmental use are available. More general, this system could serve as a case-study to test the broad applicability of autotransporter based surface display.

Results

Based on the P. stutzeri A15 EstA autotransporter β-domain, a surface display expression module was constructed for use in P. stutzeri A15. Proof of concept of this module was presented by successful surface display of the original EstA passenger domain, which retained its full esterase activity. Almost all of the tested heterologous passenger domains however were not exposed at the cell surface of P. stutzeri A15, as assessed by whole cell proteinase K treatment. Only for a beta-lactamase protein, cell surface display in P. stutzeri A15 was comparable to presentation of the original EstA passenger domain. Development of expression modules based on the full-length EstA autotransporter did not resolve these problems.

Conclusions

Since only one of the tested heterologous passenger proteins could be displayed at the cell surface of P. stutzeri A15 to a notable extent, our results indicate that the EstA autotransporter cannot be regarded as a broad spectrum cell surface display system in P. stutzeri A15.

Background

To cross the subsequent hurdles posed by the inner membrane, the periplasm and the outer membrane, Gram-negative bacteria have evolved at least seven different protein secretion mechanisms [1, 2]. One widespread family of secreted proteins is constituted by autotransporters (ATs). These ATs represent a subset of the type V secretion system. This system is often regarded as the most simple secretion apparatus of Gram-negative bacteria. ATs possess a modular structure consisting of an N-terminal signal peptide for targeting to the Sec translocon and subsequent translocation across the inner membrane, a passenger domain which represents the (often secreted) extracellular part and a C-terminal β-barrel domain which anchors the protein in the outer membrane. The passenger domain and the β-barrel domain are separated by an α-helical linker domain [3]. The term AT was based on the initial view that no accessory proteins are required for transport of the passenger domain to the cell surface (and subsequent secretion). Yet, evidence shows that at least the Bam complex also fulfills an important role in this process [4].

Research in ATs originates from the role of most characterized ATs as virulence factors [5]. Apart from this, ATs are mainly of interest because replacement of the passenger domain with a heterologous protein makes them suitable candidates for cell surface display, a process termed autodisplay. Amongst others, it has been applied in vaccine development, library screening and whole-cell biocatalysis [6]. The most recent use is the extracellular accumulation of recombinant proteins [7, 8]. Often this system is regarded as a universal and broadly applicable cell surface display system posing minimal requirements to the passenger domain [6, 8].

The biotechnological use of AT proteins has been mainly focused on Escherichia coli as host organism. For environmentally relevant biotechnological applications however, a more robust host is needed. The use of a different host organism for such applications is nevertheless limited to a few reports addressing metal remediation with Cupriavidus metallidurans CH34 [9, 10] or Pseudomonas putida[11] for which the researchers applied the heterologous AT IgA of Neisseria gonorrhoeae. The use of an autologous AT, instead of a heterologous AT, might however be more appropriate. At least for E. coli, it has been suggested that the actual breakthrough for autodisplay has been initiated by the use of a for E. coli autologous AT [12].

Because of their involvement in environment-related processes, P. stutzeri strains represent good candidates for use in environmental applications [13]. We recently characterized the P. stutzeri A15 EstA AT [14], a close homologue of EstA of Pseudomonas aeruginosa PAO1 for which the full-length crystal structure is known [15]. They both are members of the GDSL ATs which represent a distinct family among the AT family. Features that distinguish their passenger domains from the majority of the ATs are their lipolytic activity, the permanent covalent attachment to the β-domain after surface display and the absence of the right-handed parallel β-helix structure [16]. An expression module based on the Pseudomonas putida EstA β-barrel domain was used to display a β-lactamase [17] and Pseudomonas and Burkholderia lipases at the cell surface of E. coli[18]. Becker et al. developed an expression module based on the entire EstA AT of P. aeruginosa for the cell surface display of lipolytic enzymes [19]. With the same expression module also a foldase was displayed at the cell surface [20].

We aimed to investigate the broad applicability of cell surface display of heterologous passenger domains using the AT system. As an interesting case-study we developed a P. stutzeri A15 EstA AT based expression module for the surface display of environmentally relevant proteins in P. stutzeri A15. This bacterium was isolated from the roots of paddy rice and later on classified as P. stutzeri[21, 22]. The design of our β-domain based expression module could successfully be tested by the surface display of the original EstA passenger domain. This proof of concept contrasted with the encountered difficulties when heterologous passenger domains were used. We could show that the majority of these proteins were not displayed at the cell surface of P. stutzeri A15. The construction of two different expression modules based on the full-length EstA AT did not substantially solve these problems. Consequently, we conclude that the EstA AT cannot be regarded as a broad applicable cell surface display system in P. stutzeri A15.

Results

An EstA β-domain based expression module and the original EstA passenger domain as proof of concept

The recently published crystal structure of the EstA homologue of P. aeruginosa[15] served as a template to construct a structural model using the I-TASSER server [23] depicted in Figure 1A. The model allowed for the structurally informed design of two P. stutzeri A15 EstA based expression modules. Although still under debate [24, 25], recent research suggests that only the β-barrel and the α-helical linker are sufficient for AT based surface display [8, 26]. Therefore the designed expression modules, integrated in the pHERD26T backbone, contain a transport unit consisting of the β-barrel and the α-helical linker (from residue A311 to L636, residue numbering starting at the GTG start codon; EstAβ on Figure 1B) of P. stutzeri A15 EstA as derived from the structural model. These expression modules also contain the P. stutzeri A15 EstA signal peptide. Furthermore two SfiI sites which allow directional cloning of different passenger domains and an E-epitope tag for detection were cloned between the signal peptide and the transport unit (Figure 1B). The signal peptide cleavage site was not affected compared to the wild type EstA when assessed by SignalP [27]. Both the SfiI sites and the E-epitope tag have previously been used to construct a full length P. aeruginosa system for the surface display of lipases [19]. The two expression modules were named pEstAβ and pEstAβL, and express identical ORFs but differ at the 5′ untranslated region (UTR) preceding the ORF. The 5′ UTR of pEstAβL is identical to the 5′ UTR of pHERD26T-estA, which expresses the EstA AT, and was therefore expected to have similar expression levels as the latter. As a preliminary test, the P. stutzeri A15 EstAP passenger domain (from residue P27 to S325, EstAP on Figure 1B) was cloned as the passenger domain in the expression modules yielding pEstAβestAP and pEstAβL-estAP. The EstAP fusion protein expressed from these plasmids only differs from EstA, which was expressed from pHERD26T-estA, by the presence of the E-epitope tag and the SfiI sites. A schematic representation of EstA derived from pHERD26T-estA and a fusion protein expressed from the expression modules pEstAβ and pEstAβL is depicted in Figure 1B.

Figure 1
figure 1

Surface display of the EstA passenger domain. (A) Structural model of P. stutzeri A15 EstA (from D24 to L636) constructed using I-TASSER [23]. (B) Schematic representation of proteins expressed from pHERD26T-estA (EstA), pEstAβ/pEstAβL and pEstA/pEstA*. (A B) Residues delineating the part of EstA used for constructing pEstAβ/pEstAβL (EstAβ) are in blue (A311 and L636). Residues marking the esterase passenger domain (EstAP) are coloured in magenta (P27 and S325). Residues for generating the full-length AT based constructs pEstA/pEstA* (V20, black and L636, blue; see further) have been depicted. The difference between pEstA and pEstA*, mutagenesis of the catalytic serine residue (S*A), has been indicated. The GDSL esterase passenger domain (GDSL), the α-helical linker domain (α) and the β-barrel domain have been depicted in red, yellow and orange respectively, signal peptide (SP), E-epitope tag (E), SfiI restriction site (SfiI). (C) Induced cells of P. stutzeri A15 pHERD26T-estA, pEstAβestAP, pEstAβL-estAP or empty vector (EV) were treated with proteinase K (PK +) or mock-treated (PK -) and analyzed with Western blot using anti-EstA serum (α-EstA) or anti-GroEL (α-GroEL). (D-E) Relative esterase activity of (D) cells of P. stutzeri A15 pHERD26T-estA, pEstAβ-estAP, pEstAβL- estAP or empty vector (EV) or (E) membrane fractions containing equal amounts of EstA/EstAP (Additional file 1: Figure S1). Data represent the mean of three independent repeats ± 95% confidence interval. The significance level (P < 0.05) as determined by one-way ANOVA with Student-Newman-Keuls post-hoc analysis, is indicated with a letter code. Molecular weight markers (kDa) are indicated at the side.

The EstAP fusion proteins derived from pEstAβ-estAP and pEstAβL-estAP as well as EstA from pHERD26T-estA were produced in P. stutzeri A15 cells. Both expression and cell surface display could be confirmed for all proteins by analyzing samples derived from whole cell proteinase K assays with SDS-PAGE and Western blot using α-EstA serum (Figure 1C). Cell integrity in these samples was monitored by testing GroEL as a negative control protein. Furthermore, the functionality of the fusion proteins was tested by assessing the esterase activity of whole cells (Figure 1D). The data revealed the expected lower esterase activity of cells containing pHERD26T-estA or pEstAβL-estAP as compared to cells containing pEstAβ-estAP. This was expected since the 5′ UTR of these constructs is different. More surprising was the observation that the whole cell esterase activity differed between cells containing pHERD26T-estA and pEstAβL-estAP. The esterase activity level of the latter did not even significantly differ from the empty vector (EV) negative control. Western blot analysis however revealed that the protein level of EstAP derived from pEstAβL-estAP is much lower than the level of EstA (Figure 1C). Moreover, the analysis of the esterase activity of membrane fractions (MFs) containing equal amounts of EstA or EstAP (Additional file 1: Figure S1) revealed that both proteins showed similar esterase activities (Figure 1E) and that this activity was membrane-associated.

Despite the similarities between the EstAP fusion proteins and EstA, we could observe a difference in stability of the passenger domain. We have previously shown that also the passenger domain of EstA and not only the β-barrel domain shows a heat modifiability shift, indicative of its relatively high stability [14]. Heat modifiability analysis showed that this shift could not be seen for the passenger domain of the EstAP fusion proteins. This is indicative of a less stable passenger domain in the EstAP fusion proteins (Additional file 2: Figure S2). The presence of the E-tag and the SfiI sites are likely to be responsible for the lowered stability of the passenger domain of EstAP compared to the one of EstA. Presumably they are also accountable for the difference in protein levels between pHERD26T-estA and pEstAβL containing cells.

Altogether these results indicate that the insertion of additional elements for the construction of an EstA based expression module do not abolish the functional surface display of the autologous passenger domain in P. stutzeri A15. The low protein levels obtained with pEstAβL favor the use of pEstAβ in further experiments.

Limitations for cell surface display of heterologous passenger proteins

Next, we intended to verify the universality of the pEstAβ expression module. Hereto, the coding sequences of several different passenger domains were cloned into the SfiI sites of pEstAβ (Additional file 3: Table S1). Because of a general interest in addressing quorum sensing dependent biofilm formation, we assessed the cell surface display of three different lactonases: a Bacillus AiiA homologue named AiiAsoil and the related lactonases of Agrobacterium tumefaciens AiiB and AttM. To verify the more general applicability of the expression module also other proteins were examined: the fluorescent proteins mCherry, eGFP and yEVenus and the periplasmic protein Bla which has beta-lactamase activity.

Fusion protein production and cell surface display in P. stutzeri A15 was examined using whole cell proteinase K assays and subsequent analysis of the samples with SDS-PAGE and Western blot using α-E-tag antibodies or α-EstA serum (Figure 2A, B and Additional file 4: Figure S3). In most cases two different bands could be identified with a small difference in apparent molecular weight. The band with the higher apparent molecular weight (indicated with a ‘*’ in Figure 2), which represented the majority of the fusion proteins, was inaccessible for proteinase K. The band with the lower apparent molecular weight (indicated with an ‘o’ in Figure 2), which is much less abundant than the band with the higher molecular weight, was accessible for proteinase K. Membrane fractions were isolated to assess the heat modifiability of these different bands (Figure 2C and D). The results showed that the band with the higher apparent molecular weight was not heat modifiable. In some cases the lower band did show a heat modifiability, in other cases this band is too faint to clearly visualize a potential heat modifiability shift. In combination with the evidence obtained from the whole cell proteinase K treatment assays this implies that the band with the lower apparent molecular weight was correctly folded in the MF and displayed at the cell surface. More importantly, the majority of the fusion proteins was not present in a correctly folded manner in the MF and was also not displayed at the cell surface. One notable exception was pEstAβ-bla in which case the majority of the fusion protein was present as the band with the lower apparent molecular weight that was proteinase K accessible (Figure 2B, lanes 7 and 8) and heat modifiable (Figure 2D, lanes 9 and 10).

Figure 2
figure 2

EstA β-domain mediated surface display of heterologous passenger domains. (A-B) Induced cells of P. stutzeri A15 pEstAβ-mCherry/eGFP/yEVenus/aiiA/aiiB/attM/bla or empty vector (EV) were treated with proteinase K (PK +) or mock-treated (PK -). Samples were analyzed with Western blot using anti-EstA serum (α-EstA), anti-E-tag antibodies (α-E-tag) or anti-GroEL antibodies (α-GroEL). (C-D) Heat modifiability analysis of proteins in the membrane fractions of samples in (A-B). SDS-PAGE samples were incubated at room temperature (RT) or 100°C and analyzed with Western blot using anti-EstA serum (α-EstA). The band with the higher apparent molecular weight, containing the signal peptide, is indicated with an ‘*’. The band with the lower apparent molecular weight, without the signal peptide is indicated with an ‘o’. Molecular weight markers are indicated at the side of the panels.

The most obvious explanation for the difference in molecular weight between the two protein bands is the presence of the signal peptide in the protein band with the highest molecular weight. Therefore, the presence of this protein band in the MF indicates that these proteins are stuck at the inner membrane or represent protein aggregates that are too small to be precipitated by the initial clearance step of the cell fractionation protocol. Both explanations are in accordance with the absence of a heat modifiability shift of the proteins and their inaccessibility for proteinase K. In some cases also smaller sized specific protein bands could be identified, indicating either way translation intermediates or breakdown products.

Alltogether the results obtained for the heterologous passenger domains strongly differ from the results for the successfully displayed original EstA passenger domain. The results provide evidence that in almost all cases only a limited amount of the in P. stutzeri A15 expressed fusion proteins with a heterologous passenger domain can be displayed at the cell surface.

Presence of the original AT passenger domain does not substantially improve surface display of heterologous passenger domains

Because of the problems associated with the pEstAβ expression module we decided to construct a full-length AT based expression module. Moreover, recently published work suggested a promoting role for the autologous passenger domain in AT based surface display of heterologous passenger domains [25]. Also, previous work on surface display based on EstA of P. aeruginosa made use of a full-length AT based expression module [19, 20].

The pEstA and pEstA* expression modules consist of the full length EstA of P. stutzeri A15 (from residue V20 to residue L636, see Figure 1B). In the pEstA* plasmid, the catalytic serine of EstA was substituted for an alanine by site directed mutagenesis. Besides this mutation, both plasmids are identical to the pEstAβ plasmid containing the P. stutzeri A15 EstA signal peptide, two SfiI sites and an E-epitope tag. The same passenger domains as used for the pEstAβ experiments were cloned in pEstA and pEstA* (Additional file 3: Table S1). A schematic representation of a fusion protein expressed from these plasmids has been depicted in Figure 1B.

The production of the fusion proteins and their cell surface display in P. stutzeri A15 was assessed using whole cell proteinase K assays and analysis of the samples with SDS-PAGE and Western blot (Figures 3A-B and Additional files 5: Figures S4-S7). In general, the results are similar to the ones obtained for the pEstAβ derived fusion proteins. Again, the bulk of the fusion proteins was inaccessible for proteinase K. When analyzing the MF, the inaccessible proteins also did not show a heat modifiability shift while the less abundant proteinase K accessible proteins did show a heat modifiability shift (Figures 3C and Additional files 6: Figures S8-S10). Also here, the exception was pEstA-bla/pEstA*-bla of which the greater part of the fusion proteins was properly folded in the MF (Figure 3C and Additional file 6: Figure S8) and displayed at the cell surface (Figure 3B and Additional file 5: Figure S7). In general, lower bands that did not show heat modifiability presumably represent translation intermediates or breakdown products.

Figure 3
figure 3

EstA β-domain mediated surface display of heterologous passenger domains. (A-B) Induced cells of P. stutzeri A15 pEstA/pEstA*-aiiA/aiiB/bla or empty vector (EV) were treated with proteinase K (PK +) or mock-treated (PK -). Samples were analyzed with Western blot using anti-EstA serum (α-EstA) or anti-GroEL antibodies (α-GroEL). Similar Western blots for P. stutzeri A15 pEstA/pEstA*-aiiA/aiiB/attM/mCherry/eGFP/yEVenus/bla using anti E-tag antibodies are given in Additional file 6: Figures S5-S8. (C) Heat modifiability analysis of proteins in the membrane fractions of pEstA samples in (A-B). SDS-PAGE samples were incubated at room temperature (RT) or 100°C and analyzed with Western blot using anti E-tag antibodies (α-E-tag). Western blots for pEstA-mCherry/eGFP/yEVenus and pEstA* samples are given in Additional file 7: Figure S9-S11. The band with the higher apparent molecular weight, containing the signal peptide, is indicated with an ‘*’. The band with the lower apparent molecular weight, without the signal peptide is indicated with an ‘o’. Molecular weight markers are indicated at the right side of the panels.

These data suggest that the problems associated with the EstA AT based surface display using the β-barrel domain in P. stutzeri A15 cannot substantially be alleviated by including the original passenger domain in the expression module.

The beta-lactamase passenger domain is present in an enzymatically active conformation

Surface display does not imply that the passenger domain is also in an active conformation. As described above (Figure 1D), the EstA passenger domain retained its esterase activity when displayed at the cell surface with the pEstAβ expression module. The whole cell proteinase K and heat modifiability assays showed that only the beta-lactamase passenger domain was substantially displayed at the cell surface of P. stutzeri A15. Therefore the beta-lactamase activity of whole cells containing the pEstAβ-bla, pEstA-bla and pEstA*-bla plasmids was analyzed using nitrocefin as a substrate. This revealed that in all three cases a significant beta-lactamase activity could be detected as compared to the EV negative control and pEstAβ-estAP (Figure 4).

Figure 4
figure 4

β-lactamase activity of P. stutzeri A15 pEstA β - bla , pEstA- bla and pEstA*- bla. Relative β-lactamase activity of whole cells of P. stutzeri A15 pEstAβ-estAP, pEstAβ-bla, pEstA-bla, pEstA*-bla or empty vector (EV) assessed with nitrocefin as the substrate. Data represent the mean of three independent repeats ± 95% confidence interval. The significance level (P < 0.05) as determined by one-way ANOVA with Student-Newman-Keuls as post-hoc analysis is indicated with a letter code.

Discussion

Up to now, various ATs have been used for the cell surface display of in total over thirty passenger domains [12]. In the past, the versatility and universality of AT based cell surface display has been emphasized [6, 28]. Even more recently it was pointed out that this technology could be used for the extracellular accumulation of proteins with a diversity in size, structure and function [8]. With this in mind, we set out to test the broad applicability of AT based cell surface display using the recently characterized autologous EstA AT [14] in P. stutzeri A15 as a test-case.

In the first experiments, an expression module based on the EstA β-barrel and α-helix was constructed. Whole cell proteinase K assays and esterase activity assays validated the expression module by showing the successful cell surface display of the original EstA passenger domain. Also cell surface display of a functional beta-lactamase as the passenger domain could be attained. So far, our results are in line with previous papers describing AT based cell surface display of esterases/lipases [18, 19, 29, 30] and a beta-lactamase [17] in E. coli. However, the same expression module failed to successfully display the majority of the fusion proteins with one of three different lactonases, AiiAsoil, AiiB or AttM, as passenger domain. Also when one of the fluorescent proteins mCherry, eGFP or yEVenus was used as passenger domain, no successful cell surface display could be realized. Most reports focusing on passenger domain structure have looked at formation of disulfide bonds within the passenger domain in the periplasm and the compatibility with surface display. Recent research seems to have reached a consensus on this point suggesting that only disulfide bonds between closely spaced cysteine residues in the passenger domain can be tolerated to achieve successful surface display [31, 32]. The crystal structures of the fluorescent passenger domains reveal a β-barrel fold without disulfide bonds [33–35]. The same is true for the crystal structure of the AiiA lactonase of Bacillus thuringiensis[36] and on the basis of homology also for the lactonases used in this study. The only passenger domain that could successfully be surface displayed was a TEM β-lactamase. Interestingly, the crystal structure of the TEM-1 β-lactamase [37], contains one disulfide bond. The overall structure of this protein reveals a more globular structure which resembles most the structure of the original GDSL passenger domain. However, the globular structure is most likely not the main reason for surface display since β-lactamases have already been used as passenger domain for surface display using ATs with a completely different passenger domain structure [25, 38]. Whereas the surface display of β-lactamases is in line with our findings, the display of the mCherry protein at the cell surface using the Pet AT [8] and the mRFP1 protein using the YfaL AT [7] is in contrast with our findings. In both studies [7, 8] cell surface display was achieved in E. coli.

A minimal translocation unit for AT based cell surface display, consisting of the β-barrel domain and the α-helical linker domain, has been described for several ATs [39–43] including the EstA AT of P. putida[17]. More recently however, this original view was debated by the finding that the cell surface expression of heterologous proteins was increased when the full-length IcsA AT was used rather than only the β-domain [25]. This was supported by work on the Hbp AT where an intact β-stem was needed for efficient extracellular expression of the ESAT6 antigen [24].

Because of these reports and other publications in which a full-length EstA AT of P. aeruginosa was applied [19, 20] we designed full length EstA expression modules based on the EstA AT of P. stutzeri A15. Apart from the β-barrel domain and the α-helical linker domain also the original esterase passenger domain was present in these modules, once with and once without the catalytic serine residue. The presence of the original passenger domain did not substantially resolve the problems encountered previously with the β-barrel domain based construct.

Also, in various cases smaller sized bands could be visualized. They could be indicative of translation intermediates or breakdown products. In E. coli it has been shown that surface exposed proteins can be proteolytically cleaved by the presence of proteases. Therefore, E. coli strains lacking the outer membrane protease (OmpT), like UT5600, are often preferred as host [12].

A first possible explanation for the differences between our results and reports describing successful surface display is the use of a different host organism. However, an often addressed issue for autodisplay in E. coli, the use of an for the host organism autologous AT, is nonetheless fulfilled [12]. Another reason could be the difference in viewpoint. Instead of focusing on the small fraction of passenger proteins that are proteinase K accessible and heat modifiable we concentrated on the major fraction of the proteins that were not secreted. The benchmark for successful surface display in our case was set by the data available for the surface display of the original EstA passenger domain using the β-barrel domain based construct. Others might have applied the term successful surface display in a less stringent way. Also, literature presumably has a bias towards the successful use of ATs for surface display. Despite the fact that the number of reports criticizing AT based surface display are limited, publications have reported the negative effect on membrane permeability [44] and on cell survival [45].

To end, it is important to mention that some reports are available which have addressed the nature of the passenger domain. The mechanism of translocation and secretion of passenger domains in the majority of these studies was only addressed by looking to the effects of introducing cysteine residues and the resulting disulfide bond formation. Some of the initial studies revealed the incompatibility of periplasmic disulfide bond formation with translocation of passenger domains [46–48]. These early reports were later contested by work describing the successful translocation of folded domains containing disulfide bonds [26, 49, 50]. The most recent studies on this topic however concluded that disulfide bond formation can only be tolerated if the cysteine residues are closely spaced [31, 32]. Using a different approach it was suggested that the folding of a MalE passenger domain fused to the IgA AT interfered with its translocation across the outer membrane [51]. Also the introduction of the rigid and bulky calmodulin in the backbone of the Hbp AT has been shown to negatively affect secretion [32]. Finally it was proposed that secretion efficiency is dependent on the folding properties of the passenger domain itself [52]. Based on our results and the discussion above we suggest that more basic molecular knowledge of naturally occuring autotransporters is needed before such systems can be used for heterologous expression.

Conclusion

We have shown that an expression module based on the β-domain of the P. stutzeri A15 EstA AT is not generally applicable for successful surface display of heterologous passenger domains in P. stutzeri A15. Essentially, the same holds true for expression modules based on the full-length EstA AT. In conclusion, the EstA AT cannot be seen as a broad applicable cell surface display system in P. stutzeri A15.

Methods

Bacterial strains and growth conditions

E. coli strain Top10 (Life Technologies) was used for cloning. For protein expression, P. stutzeri strain A15 [21, 22] was used. Triparental conjugation of plasmids to P. stutzeri A15 was carried out with the helper plasmid pRK2073.

P. stutzeri A15 and E. coli strains were routinely cultured as described before [14]. If appropriate, antibiotics were added to the media in a final concentration of 10 μg ml-1 for tetracycline (Tc) and 50 μg ml-1 for spectinomycin (Sp).

Construction of plasmids and general molecular biological techniques

All restriction enzymes (New England Biolabs), T4 DNA ligase (Life Technologies), Pfx DNA polymerase (Life Technologies), GenElute HP Plasmid Miniprep Kit (Sigma-Aldrich), GenElute PCR Clean Up Kit (Sigma-Aldrich), QIAEX II Gel Extraction Kit (Qiagen) and Puregene Genomic DNA Isolation Kit (Qiagen) were used according to the manufacturer’s instructions. Oligonucleotide primers were purchased from IDT DNA. All plasmids were sequenced by GATC Biotech to verify the nucleotide sequences.

All plasmids and primers used in this study are listed in Table S1 (Additional file 3) and Table S2 (Additional file 7), respectively. The plasmids constructed in this study have a pHERD26T [53] backbone. To construct the pEstAβ plasmid a number of intermediate constructs was created. The β-domain and part of the α-helical linker (from residue W328 to residue L636, residue numbering starting at the GTG start codon) of estA were PCR amplified with primers AI2981 and AI2982. This fragment was cloned in the HindIII/XbaI sites of pHERD26T. In the next step, the nucleotide sequence coding for the EstA signal peptide, 2 SfiI sites and the E-tag were introduced into the intermediary plasmid. Hereto a pUC19 fragment was PCR amplified using primers AI3505 and AI3507 and cloned into the vector in the XbaI/NcoI sites. The original pHERD26T SfiI site was furthermore removed by site directed mutagenesis with primers AI4569, AI4570, AI4571 and AI4572. Because this intermediary plasmid did not possess the entire α-helical linker, a new estA fragment was PCR amplified with primers AI4985 and AI4986 and cloned in the XbaI/SalI sites. This resulted in the pEstAβ plasmid (with the α-helical linker starting from residue A311). To construct pEstAβL, the 5’ UTR of pHERD26T-estA was PCR amplified with primers AI7328 and AI7329 and cloned into the XbaI/NcoI sites of pEstAβ.

In the first step to create the pEstA and pEstA* plasmids an estA fragment without the signal peptide (from residue V20 to residue L636) was PCR amplified using primers AI2982 and AI2984. The PCR product was cloned in the HindIII/XbaI sites of pHERD26T. Hereafter the nucleotide sequence coding for the EstA signal peptide, 2 SfiI sites and the E-tag were added to the plasmid. This was done by PCR amplification of a pUC19 spacer fragment using the primers AI4184 and AI3507 and subsequent cloning in the XbaI/EcoRI sites. Also here the pHERD26T original SfiI site was afterwards removed by site directed mutagenesis. Because of a different cloning strategy the 5′ UTR of the resulting plasmid differs from the one present in pEstAβ. To get similar expression levels for both plasmid series the pEstAβ 5′ UTR was also used for this plasmid series. In a first step a silent mutation removed the NcoI site present in the estA fragment of the plasmid using primers AI6276, AI6277, AI6278 and AI6280. In the resulting vector the XbaI/NcoI fragment was replaced by the XbaI/NcoI fragment of pEstAβ resulting in pEstA. In this plasmid the catalytic serine of EstA was substituted for an alanine by site directed mutagenesis using primers AI5083, AI5084, AI5085 and AI6280. This gave rise to pEstA*.

To create pEstAβ-aiiA, pEstAβ-aiiB, pEstAβ-attM, pEstAβ-eGFP, pEstAβ-mCherry, pEstAβ-yEVenus and pEstAβ-bla the coding sequences of respectively aiiA, aiiB, attM, eGFP, mCherry, yEVenus and bla were PCR amplified with the respective primer pairs AI4567/AI4568, AI4958/AI4959, AI4956/AI4957, AI5247/AI5248, AI5247/AI5248, AI5245/AI5246 and AI7193/AI7194 on the respective DNA templates pMIR101, Agrobacterium tumefaciens C58 gDNA, Agrobacterium tumefaciens C58 gDNA, pET28a-eGFP, pET28a-mCherry, pKT103 and pUC19. The resulting fragments were cloned into the SfiI sites of pEstAβ. In a similar way pEstA-aiiA, pEstA*-aiiA, pEstA-aiiB, pEstA*-aiiB, pEstA-attM, pEstA*-attM, pEstA-eGFP, pEstA*-eGFP, pEstA-mCherry, pEstA*-mCherry, pEstA-yEVenus, pEstA*-yEVenus, pEstA-bla and pEstA*-bla were constructed. pEstAβ-estAP, pEstA-estAP and pEstA*-estAP were made by cloning the coding sequence of the esterase passenger domain of estA (from residue P27 to S325) into pEstAβ, pEstA and pEstA* respectively.

Protein expression and analysis

Expression of ORFs on the pHERD26T derivatives was under control of the pBAD promoter. P. stutzeri A15 strains were grown at 30°C and 200 rpm in LB + Tc until OD600 of 0.8 was reached and 0.2% L-arabinose (final concentration) was added to start protein production. After induction, growth was continued at 23°C and 200 rpm for 3 hours.

For whole cell proteinase K digestion assays, 1.5 ml samples were resuspended in buffer (50 mM Tris pH 8, 7.5 mM CaCl2) to obtain an OD600 of 5. 100 μl samples were treated with a final concentration of 100 ng μl-1proteinase K (Fischer) or mock treated with distilled water and incubated for one hour at 37°C and 1400 rpm. To stop digestion 4 mM phenylmethanesulfonylfluoride was added. After centrifugation, the cell pellet was resuspended in 105 μl buffer (50 mM Tris pH 8, 4 mM phenylmethanesulfonylfluoride).

To test for beta-lactamase activity, induced cells were resuspended in 0.85% NaCl to obtain an OD600 of 1.5. A 0.5 mg ml-1 nitrocefin stock solution (2 mg nitrocefin, Calbiochem) was suspended in 1.9 ml 100 mM MOPS, 0.85% NaCl, pH 7 and 0.1 ml DMSO and was twenty-fold diluted in 100 mM MOPS, 0.85% NaCl, pH 7.90 μl was added to 10 μl of the bacterial suspension. The activity was measured by monitoring OD486 at 37°C. Esterase activity of whole cells or MFs was measured as described before [14]. MFs were prepared starting from 200 mg cell pellet as previously described [14].

For visualization, proteins were separated by SDS-PAGE (NuPAGE 10% Bis-Tris MOPS, Life Technologies) and detected with Western blotting. Prior to SDS-PAGE, samples were heated 10 min at 70°C unless otherwise stated. After electrophoresis, proteins were transferred onto polyvinylidene fluoride membranes (Life Technologies) by electroblotting (30V/60 min at 4°C). Membranes were incubated with the previously described rabbit anti-EstA serum (1:2000 dilution) [14], rabbit anti E-tag antibodies (1:2000 dilution, Abcam) or with rabbit anti-GroEL antibodies (1:2000 dilution, Sigma-Aldrich). Detection was done via alkaline-phosphatase conjugated goat anti-rabbit IgG secondary antibodies (Sigma-Aldrich) and NBT/BCIP (Nitro blue tetrazolium chloride/5-Bromo-4-chloro-3-indolylphosphate, Sigma).

Abbreviations

AT:

Autotransporter

EstAP:

EstA passenger domain

EV:

Empty Vector

MF:

Membrane Fraction

PK:

Proteinase K

UTR:

Untranslated Region.

References

  1. Economou A, Christie PJ, Fernandez RC, Palmer T, Plano GV, Pugsley AP: Secretion by numbers: Protein traffic in prokaryotes. Mol Microbiol. 2006, 62 (2): 308-319. 10.1111/j.1365-2958.2006.05377.x

    Article  CAS  Google Scholar 

  2. Abdallah MA, Van Pittius NCG, Champion PAD, Cox J, Luirink J, Vandenbroucke-Grauls CMJE, Appelmelk BJ, Bitter W: Type VII secretion - mycobacteria show the way. Nat Rev Microbiol. 2007, 5 (11): 883-891. 10.1038/nrmicro1773

    Article  CAS  Google Scholar 

  3. Dautin N, Bernstein HD: Protein secretion in Gram-negative bacteria via the autotransporter pathway. Annu Rev Microbiol. 2007, 61: 89-112. 10.1146/annurev.micro.61.080706.093233

    Article  CAS  Google Scholar 

  4. Leyton DL, Rossiter AE, Henderson IR: From self sufficiency to dependence: mechanisms and factors important for autotransporter biogenesis. Nat Rev Microbiol. 2012, 10 (3): 213-225. 10.1038/nrmicro2733

    Article  CAS  Google Scholar 

  5. Nishimura K, Tajima N, Yoon Y-H, Park S-Y, Tame JRH: Autotransporter passenger proteins: virulence factors with common structural themes. J Mol Med-Jmm. 2010, 88 (5): 451-458. 10.1007/s00109-010-0600-y. 10.1007/s00109-010-0600-y

    Article  CAS  Google Scholar 

  6. Jose J, Meyer TF: The autodisplay story, from discovery to biotechnical and biomedical applications. Microbiol Mol Biol R. 2007, 71 (4): 600-619. 10.1128/MMBR.00011-07. 10.1128/MMBR.00011-07

    Article  CAS  Google Scholar 

  7. Ko H-J, Park E, Song J, Yang TH, Lee HJ, Kim KH, Choi I-G: Functional cell surface display and controlled secretion of diverse agarolytic enzymes by Escherichia coli with a novel ligation-independent cloning vector based on the autotransporter YfaL. Appl Environ Microbiol. 2012, 78 (9): 3051-3058. 10.1128/AEM.07004-11

    Article  CAS  Google Scholar 

  8. Sevastsyanovich YR, Leyton DL, Wells TJ, Wardius CA, Tveen-Jensen K, Morris FC, Knowles TJ, Cunningham AF, Cole JA, Henderson IR: A generalised module for the selective extracellular accumulation of recombinant proteins. Microb Cell Fact. 2012, 11: 69-, 10.1186/1475-2859-11-69

    Article  CAS  Google Scholar 

  9. Biondo R, da Silva FA, Vicente EJ, Souza Sarkis JE, Schenberg AC: Synthetic phytochelatin surface display in Cupriavidus metallidurans CH34 for enhanced metals bioremediation. Environ Sci Technol. 2012, 46 (15): 8325-8332. 10.1021/es3006207

    Article  CAS  Google Scholar 

  10. Valls M, Atrian S, de Lorenzo V, Fernandez LA: Engineering a mouse metallothionein on the cell surface of Ralstonia eutropha CH34 for immobilization of heavy metals in soil. Nat Biotechnol. 2000, 18 (6): 661-665. 10.1038/76516

    Article  CAS  Google Scholar 

  11. Valls M, de Lorenzo V, Gonzalez-Duarte R, Atrian S: Engineering outer-membrane proteins in Pseudomonas putida for enhanced heavy-metal bioadsorption. J Inorg Biochem. 2000, 79 (1–4): 219-223.

    Article  CAS  Google Scholar 

  12. Jose J, Maas RM, Teese MG: Autodisplay of enzymes-Molecular basis and perspectives. J Biotechnol. 2012, 161 (2): 92-103. 10.1016/j.jbiotec.2012.04.001

    Article  CAS  Google Scholar 

  13. Garcia-Valdes E, Mulet M, Lalucat J: Insights into the life styles of Pseudomonas stutzeri. Pseudomonas. Edited by: Ramos JL, Filloux A. 2010, 177-198. New York: Springer, 1,

    Chapter  Google Scholar 

  14. Nicolay T, Devleeschouwer K, Vanderleyden J, Spaepen S: Characterization of Esterase A, a Pseudomonas stutzeri A15 autotransporter. Appl Environ Microbiol. 2012, 78 (8): 2533-2542. 10.1128/AEM.07690-11

    Article  CAS  Google Scholar 

  15. van den Berg B: Crystal structure of a full-length autotransporter. J Mol Biol. 2011, 396 (3): 627-633.

    Article  Google Scholar 

  16. Wilhelm S, Rosenau F, Kolmar H, Jaeger K-E: Autotransporters with GDSL passenger domains: Molecular physiology and biotechnological applications. ChemBioChem. 2011, 12 (10): 1476-1485. 10.1002/cbic.201100013

    Article  CAS  Google Scholar 

  17. Yang TH, Pan JG, Seo YS, Rhee JS: Use of Pseudomonas putida EstA as an anchoring motif for display of a periplasmic enzyme on the surface of Escherichia coli. Appl Environ Microbiol. 2004, 70 (12): 6968-6976. 10.1128/AEM.70.12.6968-6976.2004

    Article  CAS  Google Scholar 

  18. Yang TH, Kwon M-A, Song JK, Pan JG, Rhee JS: Functional display of Pseudomonas and Burkholderia lipases using a translocator domain of EstA autotransporter on the cell surface of Escherichia coli. J Biotechnol. 2010, 146 (3): 126-129. 10.1016/j.jbiotec.2010.01.022

    Article  CAS  Google Scholar 

  19. Becker S, Theile S, Heppeler N, Michalczyk A, Wentzel A, Wilhelm S, Jaeger KE, Kolmar H: A generic system for the Escherichia coli cell-surface display of lipolytic enzymes. FEBS Lett. 2005, 579 (5): 1177-1182. 10.1016/j.febslet.2004.12.087

    Article  CAS  Google Scholar 

  20. Wilhelm S, Rosenau F, Becker S, Buest S, Hausmann S, Kolmar H, Jaeger KE: Functional cell-surface display of a lipase-specific chaperone. ChemBioChem. 2007, 8 (1): 55-60. 10.1002/cbic.200600203

    Article  CAS  Google Scholar 

  21. Vermeiren H, Willems A, Schoofs G, de Mot R, Keijers V, Hai WL, Vanderleyden J: The rice inoculant strain Alcaligenes faecalis A15 is a nitrogen-fixing Pseudomonas stutzeri. Syst Appl Microbiol. 1999, 22 (2): 215-224. 10.1016/S0723-2020(99)80068-X

    Article  CAS  Google Scholar 

  22. You CB, Song W, Wang HX, Li JP, Lin M, Hai WL: Associative nitrogen fixation of Alcaligenes faecalis with rice plant. Biol Nitrogen Fix Newsl Sydney Univ. 1983, 11: 92-103.

    Google Scholar 

  23. Zhang Y: I-TASSER server for protein 3D structure prediction. BMC Bioinforma. 2008, 9: 40-10.1186/1471-2105-9-40. 10.1186/1471-2105-9-40

    Article  Google Scholar 

  24. Jong WS, Soprova Z, de Punder K, Ten Hagen-Jongman CM, Wagner S, Wickstrom D, de Gier JW, Andersen P, van der Wel NN, Luirink J: A structurally informed autotransporter platform for efficient heterologous protein secretion and display. Microb Cell Fact. 2012, 11 (1): 85-, 10.1186/1475-2859-11-85

    Article  CAS  Google Scholar 

  25. Lum M, Morona R: IcsA autotransporter passenger promotes increased fusion protein expression on the cell surface. Microb Cell Fact. 2012, 11: 20-, 10.1186/1475-2859-11-20

    Article  CAS  Google Scholar 

  26. Marin E, Bodelon G, Fernandez LA: Comparative analysis of the biochemical and functional properties of C-terminal domains of autotransporters. J Bacteriol. 2010, 192 (21): 5588-5602. 10.1128/JB.00432-10

    Article  CAS  Google Scholar 

  27. Petersen TN, Brunak S, von Heijne G, Nielsen H: SignalP 4.0: discriminating signal peptides from transmembrane regions. Nat Meth. 2011, 8 (10): 785-786. 10.1038/nmeth.1701. 10.1038/nmeth.1701

    Article  CAS  Google Scholar 

  28. Kjaergaard K, Hasman H, Schembri MA, Klemm P: Antigen 43-mediated autotransporter display, a versatile bacterial cell surface presentation system. J Bacteriol. 2002, 184 (15): 4197-4204. 10.1128/JB.184.15.4197-4204.2002

    Article  CAS  Google Scholar 

  29. Schultheiss E, Paar C, Schwab H, Jose J: Functional esterase surface display by the autotransporter pathway in Escherichia coli. J Mol Catal B: Enzym. 2002, 18 (1–3): 89-97.

    Article  CAS  Google Scholar 

  30. Schultheiss E, Weiss S, Winterer E, Maas R, Heinzle E, Jose J: Esterase autodisplay: Enzyme engineering and whole-cell activity determination in microplates with pH sensors. Appl Environ Microbiol. 2008, 74 (15): 4782-4791. 10.1128/AEM.01575-07

    Article  CAS  Google Scholar 

  31. Leyton DL, Sevastsyanovich YR, Browning DF, Rossiter AE, Wells TJ, Fitzpatrick RE, Overduin M, Cunningham AF, Henderson IR: Size and conformation limits to secretion of disulfide-bonded loops in autotransporter proteins. J Biol Chem. 2011, 286 (49): 42283-42291. 10.1074/jbc.M111.306118

    Article  CAS  Google Scholar 

  32. Jong WSP, ten Hagen-Jongman CM, den Blaauwen T, Slotboom DJ, Tame JRH, Wickstrom D, de Gier J-W, Otto BR, Luirink J: Limited tolerance towards folded elements during secretion of the autotransporter Hbp. Mol Microbiol. 2007, 63 (5): 1524-1536. 10.1111/j.1365-2958.2007.05605.x

    Article  CAS  Google Scholar 

  33. Shu X, Shaner NC, Yarbrough CA, Tsien RY, Remington SJ: Novel chromophores and buried charges control color in mFruits. Biochemistry US. 2006, 45 (32): 9639-9647. 10.1021/bi060773l. 10.1021/bi060773l

    Article  CAS  Google Scholar 

  34. Yang F, Moss LG, Phillips GN: The molecular structure of green fluorescent protein. Nat Biotechnol. 1996, 14 (10): 1246-1251. 10.1038/nbt1096-1246

    Article  CAS  Google Scholar 

  35. Rekas A, Alattia J-R, Nagai T, Miyawaki A, Ikura M: Crystal structure of venus, a yellow fluorescent protein with improved maturation and reduced environmental sensitivity. J Biol Chem. 2002, 277 (52): 50573-50578. 10.1074/jbc.M209524200

    Article  CAS  Google Scholar 

  36. Kim MH, Choi W-C, Kang HO, Lee JS, Kang BS, Kim K-J, Derewenda ZS, Oh T-K, Lee CH, Lee J-K: The molecular structure and catalytic mechanism of a quorum-quenching N-acyl-L-homoserine lactone hydrolase. P Natl Acad Sci USA. 2005, 102 (49): 17606-17611. 10.1073/pnas.0504996102. 10.1073/pnas.0504996102

    Article  CAS  Google Scholar 

  37. Jelsch C, Mourey L, Masson JM, Samama JP: Crystal structure of Escherichia coli TEM1 beta-lactamase at 1.8 A resolution. Proteins. 1993, 16 (4): 364-383. 10.1002/prot.340160406

    Article  CAS  Google Scholar 

  38. Lattemann CT, Maurer J, Gerland E, Meyer TF: Autodisplay: Functional display of active beta-lactamase on the surface of Escherichia coli by the AIDA-I autotransporter. J Bacteriol. 2000, 182 (13): 3726-3733. 10.1128/JB.182.13.3726-3733.2000

    Article  CAS  Google Scholar 

  39. Klauser T, Kramer J, Otzelberger K, Pohlner J, Meyer TF: Characterization of the Neisseria IgA(beta) core: The essential unit for outer-membrane targeting and extracellular protein secretion. J Mol Biol. 1993, 234 (3): 579-593. 10.1006/jmbi.1993.1613

    Article  CAS  Google Scholar 

  40. Suzuki T, Lett MC, Sasakawa C: Extracellular transport of VirG protein in Shigella. J Biol Chem. 1995, 270 (52): 30874-30880. 10.1074/jbc.270.52.30874

    Article  CAS  Google Scholar 

  41. Maurer J, Jose J, Meyer TF: Characterization of the essential transport function of the AIDA-I autotransporter and evidence supporting structural predictions. J Bacteriol. 1999, 181 (22): 7014-7020.

    CAS  Google Scholar 

  42. Oliver DC, Huang G, Fernandez RC: Identification of secretion determinants of the Bordetella pertussis BrkA autotransporter. J Bacteriol. 2003, 185 (2): 489-495. 10.1128/JB.185.2.489-495.2003

    Article  CAS  Google Scholar 

  43. St Geme JW, Cutter D: The Haemophilus influenzae Hia adhesin is an autotransporter protein that remains uncleaved at the C terminus and fully cell associated. J Bacteriol. 2000, 182 (21): 6005-6013. 10.1128/JB.182.21.6005-6013.2000

    Article  CAS  Google Scholar 

  44. Van Gerven N, Sleutel M, Deboeck F, De Greve H, Hernalsteens JP: Surface display of the receptor-binding domain of the F17a-G fimbrial adhesin through the autotransporter AIDA-I leads to permeability of bacterial cells. Microbiol-Sgm. 2009, 155: 468-476. 10.1099/mic.0.022327-0. 10.1099/mic.0.022327-0

    Article  CAS  Google Scholar 

  45. Binder U, Matschiner G, Theobald I, Skerra A: High-throughput sorting of an anticalin library via EspP-mediated functional display on the Escherichia coli cell surface. J Mol Biol. 2010, 400 (4): 783-802. 10.1016/j.jmb.2010.05.049

    Article  CAS  Google Scholar 

  46. Jose J, Kramer J, Klauser T, Pohlner J, Meyer TF: Absence of periplasmic DsbA oxidoreductase facilitates export of cysteine-containing passenger proteins to the Escherichia coli cell surface via the IgA(beta) autotransporter pathway. Gene. 1996, 178 (1–2): 107-110.

    Article  CAS  Google Scholar 

  47. Klauser T, Pohlner J, Meyer TF: Extracellular transport of Cholera-toxin B-subunit using Neisseria IgA protease beta-domain: Conformation-dependent outer-membrane translocation. EMBO J. 1990, 9 (6): 1991-1999.

    CAS  Google Scholar 

  48. Klauser T, Pohlner J, Meyer TF: Selective extracellular release of Cholera toxin-B subunit by Escherichia coli: Dissection of Neisseria IgA-beta-mediated outer-membrane transport. EMBO J. 1992, 11 (6): 2327-2335.

    CAS  Google Scholar 

  49. Veiga E, de Lorenzo V, Fernandez LA: Structural tolerance of bacterial autotransporters for folded passenger protein domains. Mol Microbiol. 2004, 52 (4): 1069-1080. 10.1111/j.1365-2958.2004.04014.x

    Article  CAS  Google Scholar 

  50. Skillman KM, Barnard TJ, Peterson JH, Ghirlando R, Bernstein HD: Efficient secretion of a folded protein domain by a monomeric bacterial autotransporter. Mol Microbiol. 2005, 58 (4): 945-958. 10.1111/j.1365-2958.2005.04885.x

    Article  CAS  Google Scholar 

  51. Rutherford N, Charbonneau ME, Berthiaume F, Betton JM, Mourez M: The periplasmic folding of a cysteineless autotransporter passenger domain interferes with its outer membrane translocation. J Bacteriol. 2006, 188 (11): 4111-4116. 10.1128/JB.01949-05

    Article  CAS  Google Scholar 

  52. Renn JP, Junker M, Besingi RN, Braselmann E, Clark PL: ATP-independent control of autotransporter virulence protein transport via the folding properties of the secreted protein. Chem Biol. 2012, 19 (2): 287-296. 10.1016/j.chembiol.2011.11.009

    Article  CAS  Google Scholar 

  53. Qiu DR, Damron FH, Mima T, Schweizer HP, Yu HD: P-BAD-based shuttle vectors for functional analysis of toxic and highly regulated genes in Pseudomonas and Burkholderia spp. and other bacteria. Appl Environ Microbiol. 2008, 74 (23): 7422-7426. 10.1128/AEM.01369-08

    Article  CAS  Google Scholar 

Download references

Acknowledgements

The pHERD26T vector was a gift from H.D. Yu (Marshall University). T.N. and S.S. are recipients of a doctoral and post-doctoral fellowship grant respectively from Research Foundation Flanders (FWO-Vlaanderen).

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Stijn Spaepen.

Additional information

Competing interests

The authors declare that they have no competing interests.

Authors’ contributions

T.N., L.L, E.L. and S.B. designed and constructed the expression plasmids. T.N. performed enzymatic assays, membrane preparations and whole cell proteinase K assays. T.N., J.V. and S.S. designed the research project and wrote the manuscript. All authors read and approved the final manuscript.

Electronic supplementary material

12934_2012_789_MOESM1_ESM.pdf

Additional file 1: Figure S1. Assessment of the fusion protein concentration in the membrane fractions of P. stutzeri A15 pHERD26T-estA or pEstAβL-estAP.(PDF 110 KB)

12934_2012_789_MOESM2_ESM.pdf

Additional file 2: Figure S2. Heat modifiability analysis of proteins in the membrane fractions of P. stutzeri A15 pHERD26T-estA, pEstAβ-estAP and pEstAβL-estAP.(PDF 425 KB)

Additional file 3: Table S1. Plasmids used in this study. (PDF 31 KB)

12934_2012_789_MOESM4_ESM.pdf

Additional file 4: Figure S3. Proteinase K accessibility of fusion proteins from P. stutzeri A15 pEstAβ-mCherry/eGFP/yEVenus.(PDF 261 KB)

12934_2012_789_MOESM5_ESM.pdf

Additional file 5: Figures S4-S7. Proteinase K accessibility of fusion proteins from P. stutzeri A15 pEstA/pEstA*-aiiA/aiiB/attM/eGFP/mCherry/yEVenus/bla.(PDF 2 MB)

12934_2012_789_MOESM6_ESM.pdf

Additional file 6: Figures S8-S10. Heat modifiability analysis of proteins in the membrane fractions of P. stutzeri A15 pEstA*-aiiA/aiiB/attM/bla/eGFP/mCherry/yEVenus and pEstA-eGFP/mCherry/yEVenus.(PDF 707 KB)

Additional file 7: Table S2. Primers used in this study. (PDF 89 KB)

Authors’ original submitted files for images

Rights and permissions

Open Access This article is published under license to BioMed Central Ltd. This is an Open Access article is distributed under the terms of the Creative Commons Attribution License ( https://creativecommons.org/licenses/by/2.0 ), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Reprints and permissions

About this article

Cite this article

Nicolay, T., Lemoine, L., Lievens, E. et al. Probing the applicability of autotransporter based surface display with the EstA autotransporter of Pseudomonas stutzeri A15. Microb Cell Fact 11, 158 (2012). https://doi.org/10.1186/1475-2859-11-158

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1186/1475-2859-11-158

Keywords