Skip to main content

Highly purified mussel adhesive protein to secure biosafety for in vivo applications

Abstract

Background

Unique adhesive and biocompatibility properties of mussel adhesive proteins (MAPs) are known for their great potential in many tissue engineering and biomedical applications. Previously, it was successfully demonstrated that redesigned hybrid type MAP, fp-151, mass-produced in Gram-negative bacterium Escherichia coli, could be utilized as a promising adhesive biomaterial. However, purification of recombinant fp-151 has been unsatisfactory due to its adhesive nature and polarity which make separation of contaminants (especially, lipopolysaccharide, a toxic Gram-negative cell membrane component) very difficult.

Results

In the present work, we devised a high resolution purification approach to secure safety standards of recombinant fp-151 for the successful use in in vivo applications. Undesirable impurities were remarkably eliminated as going through sequential steps including treatment with multivalent ion and chelating agent for cell membrane washing, mechanical cell disruption, non-ionic surfactant treatment for isolated inclusion body washing, acid extraction of washed inclusion body, and ion exchange chromatography purification of acid extracted sample. Through various analyses, such as high performance liquid chromatographic purity assay, limulus amoebocyte lysate endotoxin assay, and in vitro mouse macrophage cell tests on inflammation, viability, cytotoxicity, and apoptosis, we confirmed the biological safety of bacterial-derived purified recombinant fp-151.

Conclusions

Through this purification design, recombinant fp-151 achieved 99.90% protein purity and 99.91% endotoxin reduction that nearly no inflammation response was observed in in vitro experiments. Thus, the highly purified recombinant MAP would be successfully used as a safety-secured in vivo bioadhesive for tissue engineering and biomedical applications.

Background

Mussels use unique protein-based bioadhesives that can maintain strong adhesiveness even in the aquatic environment to survive in the ocean [1, 2]. Mussel adhesive proteins (MAPs) are also known for displaying excellent biocompatibility and biodegradability [3–5]. These unique properties make MAPs promising and valuable biomaterials that can be utilized in different tissue engineering and medical applications [6, 7]. Since extracting natural adhesive proteins from mussels is a labour intensive and cost ineffective process, mass-production of recombinant MAPs has been intensively attempted for practical use of MAP [1, 8–12]. Previously, recombinant hybrid type MAP fp-151, composed of six repeats of type 1 protein (fp-1) decapeptide at both N- and C-termini of type 5 protein (fp-5), was successfully designed and obtained in Escherichia coli system with high production and purification yields [13].

Even though the establishment of recombinant fp-151 production has overcome the limitation in quantity, this system still requires much improvement on its purity and safety perspectives due to the undesirable impurities caused by Gram-negative bacterium E. coli during cell disruption and protein purification process. Due to adhesive nature and positive polarity, purification of recombinant MAPs at high purity suitable for in vivo applications has been a difficult task. Formally, recombinant fp-151 expressed in cytoplasm has been recovered using simple acid extraction method from surfactant Triton X-100-treated inclusion body [13]. However, this method cannot fully remove impurities that MAP purified in this manner does not show satisfactory purity nor safety in vivo situations. In addition, those impurities are considered to contain large amount of lipopolysaccharides (LPS) which are macro molecules consisting of a lipid and a polysaccharide linked by a covalent bond and are found in the outer membrane of Gram-negative bacteria. LPS causes serious endotoxin-related immune response problems in higher living organisms, such as fever, shock and even death [14–16]. Thus, developing an effective and reliable purification process to ensure high purity and biological safety of recombinant MAP became an important assignment to exploit it for practical in vivo biomedical applications.

In the present work, a high resolution purification process was proposed to enhance purity and ensure biological safety of E. coli-derived recombinant fp-151. This purification process was composed of three strategies targeting different steps of protein recovery: 1) multivalent ion and chelating agent treatment of whole cells to reduce cell membrane components, 2) non-ionic surfactant washing of isolated inclusion body to reduce undesirable contaminants, and 3) final ion exchange chromatographic recovery. The efficacy of this purification process was assessed in many aspects of purity and safety using various analyses including protein quantification, endotoxin assay, and in vitro macrophage cell tests.

Results and discussions

We designed a purification process composed of three strategic steps in series to satisfy purity and biological safety of recombinant MAP fp-151 for potential use in in vivo experiments through the effective removing of impurities such as contaminated proteins and LPS; 1) inclusion body isolation after disruption of CaCl2/ethylenediaminetetraacetic acid (EDTA)-treated harvested cells, 2) acetic acid extraction after double washing of isolated inclusion body with Triton X-114, and 3) ion exchange chromatography of acid-extracted supernatant (Figure 1). The purity and endotoxin levels of purified recombinant MAP were taken into consideration to verify the efficacy of purification because they are the most important safety parameters.

Figure 1
figure 1

Schematic representation of high resolution purification process for cytoplasmic expressed recombinant MAP in Gram-negative E. coli .

High resolution purification of recombinant MAP

There are many strategies to improve purity and safety that are applicable for protein purification [17, 18]. In the case of bacterial cytoplasmic expression system such as Gram-negative bacterium E. coli, cell membrane should be disrupted to obtain target heterologous proteins. As cell membrane is shattered during cell lysis, a lot of undesirable molecules such as proteins, lipids, and carbohydrates are released into cell lysate. The main source of impurities during protein purification is LPS which is found in the outer membrane of gram-negative bacteria and constitutes a large portion of cell membrane contents [14]. Thus, effectively removing LPS for E. coli system is thought as a key to ensure the purity and safety of a final product [16, 18–23]. Our previous MAP purification method was based on simple acetic acid extraction after single Triton X-100 washing of isolated inclusion body [13]. Thus, purity and biosafety of purified MAP were not guaranteed for in vivo standards. Because adhesive and positively charged nature of MAPs, they have high chance to interact with many types of impurities, especially negatively charged cell components such as LPS.

To remove cell membrane components from protein solutions, differential centrifugation technique, such as sucrose gradient centrifugation, is commonly used [24]. However, this is not suitable for the large-scale purification because it is a very time consuming method that requires more than 10–20 h of ultracentrifugation. Another interesting method is membrane washing with multivalent ions such as CaCl2 and chelating agents such as EDTA, which directly treats living cells to clean up cell membrane components [25–27]. This method is quite simple and fast compared to sucrose gradient centrifugation. Thus, it is considered to be suitable for large-scale purification of recombinant MAP. Another big source of impurities resides in the inclusion body which contains some unwanted or misfolded proteins as well as the desired protein. Moreover, inclusion body is inevitably contaminated by LPS after cell lysis, so inclusion body should be also cleaned up efficiently. For inclusion body washing, non-ionic surfactants are common choices because they are strong enough to separate proteins while weak enough not to harm the protein structure [28]. Especially, Triton X-100 and Triton X-114 are popular non-ionic surfactants known for effectively separating LPS from proteins [23, 28–30].

As pre-treatment of harvested whole cells, CaCl2/EDTA washing was used to remove LPS from the cell wall so that the chance of LPS contamination for MAP during the cell lysis can be reduced (Figure 1). After the cell pre-treatment, somewhat LPS-reduced cells were prepared for cell disruption. Then, non-ionic surfactant treatment was performed for washing the isolated inclusion body containing recombinant MAP (Figure 1). For the surfactant washing, Triton X-100 and Triton X-114 were assessed in combination to establish the best performing condition against LPS. Sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) analysis showed that recombinant MAP was properly recovered at each step of purification as a major band that appeared at ~23 kDa (Figure 2A). After adjusting the concentration of recombinant MAP from each purification step, endotoxin levels at each step were assessed through limulus amoebocyte lysate (LAL) assay (Figure 2B). We found that CaCl2/EDTA treatment reduced endotoxin level of MAP below 1/4 value of crude whole cell lysate (Figure 2B and Table 1). This result strongly suggests that multivalent calcium ions attach to negatively charged LPS residues on the cell membrane and then, EDTA chelation on those calcium ions effectively removes LPS [25–27].

Figure 2
figure 2

(A) SDS-PAGE analysis and (B) endotoxin level determination of recombinant MAP samples according to each purification step before ion exchange chromatography. The data represent mean +/− standard deviation and were analyzed 2-tails student t-test (*p < 0.05, **p < 0.01, ***p < 0.005). Abbreviations: MW, molecular weight marker; WC, whole cells; IB, isolated inclusion body containing MAP after disruption of CaCl2/EDTA-treated whole cells; X-100/100, acetic acid-extracted MAP after inclusion body washing with Triton X-100 twice; X-100/114, acetic acid-extracted MAP after inclusion body washing with Triton X-100 and Triton X-114 in order; X-114/100, acetic acid-extracted MAP after inclusion body washing with Triton X-114 and Triton X-100 in order; X-114/114, acetic acid-extracted MAP after inclusion body washing with Triton X-114 twice.

Table 1 Yield, endotoxin level, and purity of recombinant MAP in each purification step

During the protein recovery step through acetic acid extraction of inclusion bodies washed with non-ionic surfactant (Figure 1), the sample washed twice with Triton X-114 presented the best performance in endotoxin removal among four combinations of Triton X series (inner plot in Figure 2B). Even though Triton X-100 and Triton X-114 are sister chemicals, Triton X-114 has shorter hydrophilic arm than Triton X-100 has; because Triton X-114 has lower hydrophilic-lipophilic balance, it has advantage over Triton X-100 when interacting with heavy lipid chain of LPS [22, 23]. Overall, cell pre-treatment using CaCl2/EDTA and inclusion body washing with Triton X-114 greatly contributed to reduction of LPS contents in the recombinant MAP along the purification process.

To prepare highly pure and safety secured final protein product, chromatography is a necessary purification method. Several types of preparative chromatography techniques, such as size-exclusion, affinity, and ion exchange, can provide separation of mixtures. Because MAP has high isoelectric point (pI) value about 10 [13], cation exchanger, which has anionic charged group, was used to filter out anionic impurities (Figure 1). We found that protein impurities (P1 of Figure 3A & B) were efficiently removed by salt gradient and the highly cationic MAP was eluted at the last peak (P2 of Figure 3A & B) with greatly improved purity. Several small bands below the main MAP band were considered as degraded forms which are likely to possess similar positive charges with MAP (P2 of Figure 3B). Because the recombinant MAP fp-151 used in this work has highly repetitive sequence [13], the net charge and hydrophobicity of degraded forms would not be different much from MAP. In addition, because negatively charged LPS were also filtered out by cation exchange chromatography, the endotoxin amount was further reduced to nearly 20 EU per 1 mg total protein, which was significantly low value compared to MAP purified by previous method [13] and even to extracted MAP from Triton X-114-washed inclusion body (Figure 3C and Table 1).

Figure 3
figure 3

(A) Ion exchange chromatogram, (B) SDS-PAGE analysis, and (C) endotoxin level determination of recombinant MAP sample after ion exchange chromatography purification. The data represent mean +/− standard deviation and were analyzed 2-tails student t-test (*p < 0.05, **p < 0.01, ***p < 0.005). Abbreviations: MW, molecular weight marker; WC, whole cells; X-114/114, acetic acid-extracted MAP after inclusion body washing with Triton X-114 twice; P1, first peak fraction from cation exchanger of acetic acid-extracted solution after inclusion body washing with Triton X-114 twice; P2, second peak fraction from cation exchanger of acetic acid-extracted solution after inclusion body washing with Triton X-114 twice; ppMAP, purified MAP based on previous method.

Assessment of purity of recombinant MAP

Just as reducing endotoxin level to secure safety, improving purity is another purpose of this purification process. A purity of recombinant MAP was explored with total carbohydrate/lipid amount determination and high performance liquid chromatography (HPLC) analysis. The total carbohydrate/lipid amount determination is meaningful because it can reveal the amount of cellular components from E. coli left in MAP after purification step. We found that cell pre-treatment with CaCl2/EDTA cut the total quantities of carbohydrates and lipids to about 1/6 and 1/11 of whole cell lysate, respectively (Figure 4A). In addition, the quantities of carbohydrates and lipids dropped below 1 μg per 1 mg total protein through washing twice with Triton X-114. Thus, these two strategic treatments were proven to be useful in improving the purity of recombinant MAP by reducing the quantities of total carbohydrates and lipids, not just in gaining the safety.

Figure 4
figure 4

Assessment of purity of recombinant MAP. (A) Total carbohydrate/lipid amount determination and (B) HPLC chromatograms for protein purity determination. The data represent mean +/− standard deviation and were analyzed 2-tails student t-test (*p < 0.05, **p < 0.01, ***p < 0.005). Abbreviations: WC, whole cells; IB, isolated inclusion body containing MAP after disruption of CaCl2/EDTA-treated whole cells; X-114/114, acetic acid-extracted MAP after inclusion body washing with Triton X-114 twice. P2, second peak fraction from cation exchanger of acetic acid-extracted solution after inclusion body washing with Triton X-114 twice.

Next, to check protein purity, both MAP samples before (washed twice with Triton X-114) and after being purified by ion exchange chromatography were undergone HPLC analysis. While the sample washed twice with Triton X-114 produced a chromatogram which had one major peak and two minor peaks (Figure 4B-a), where those two minor peaks correspond to the impurities (Figure 3B, P1), the major portion from ion exchange chromatography (Figure 3B, P2) demonstrated only one major peak in HPLC chromatogram (Figure 4B-b). This implies that the degraded forms of MAP (minor bands in Figure 3B, P2), which have virtually the similar hydrophobicity, are eluted at the same point. The purity of recombinant MAP sample after being purified by ion exchange chromatography was significantly increased to 99.9% compared to that (89.8%) of the sample only after acid extraction of Triton X-114-treated inclusion body (Table 1). Consequently, the results of HPLC analyses indicate that ion exchange chromatography step eliminated undesired proteins efficiently and improved the purity of recombinant MAP dramatically. Interestingly, this HPLC results can also explain what those minor bands shown together with MAP in P2 of Figure 3B are; because those minor bands were not separately shown on HPLC chromatogram (Figure 4B-b), they can be considered as degraded forms of MAP, which has similar hydrophobicity that they appear at the same elution point with MAP.

Assessment of biological safety of purified recombinant MAP

Even though most of the impurities were dramatically reduced by the proposed purification process, purified recombinant MAP should meet the biological safety parameters, such as inflammation, viability, cytotoxicity, and apoptosis, for in vivo applications. Residual impurities, especially LPS, can cause the innate immune response that expressions of pro-inflammatory cytokines, such as tumour necrosis factor-alpha (TNF-α) and interleukin-6 (IL-6), were assessed using RAW 264.7 macrophage cell line. The expression levels of TNF-α and IL-6 were notably decreased along purification steps and presented lower cytokine expressions than 1 EU LPS standard-treated sample, whereas high levels of TNF-α and IL-6 were observed in recombinant MAP purified by the previous method which was based on simple acetic acid extraction after single Triton X-100 washing of isolated inclusion body [13] (Figure 5). These low activations of inflammatory signal transduction in macrophage cells were ascribed to efficacy of CaCl2/EDTA treatment and Triton X-114 washing in LPS reduction. Furthermore, almost no inflammatory cytokines were expressed by final recombinant MAP sample after ion exchange chromatography (Figure 5). This result indicates that the final product of this purification process can be applied to in vivo applications without inflammatory response. In addition, other criteria of cellular responses, such as viability, cytotoxicity, and apoptosis, were assessed using macrophage cells to ensure further biosafety of purified recombinant MAP. As results, MAP purified by our purification process showed high viability, low cytotoxicity, and low apoptotic activity compared to positive controls (Figure 6). Taken together, our highly purified recombinant MAP can be successfully used as a safe adhesive biomaterial for in vivo applications without triggering cytotoxicity and inflammatory response.

Figure 5
figure 5

Assessment of biological safety of purified recombinant MAP using inflammatory response assays on RAW 264.7 macrophage cells. (A) TNF-α and (B) IL-6 mRNA expressions were observed by treating MAP samples at each purification step. The data represent mean +/− standard deviation and were analyzed 2-tails student t-test (*p < 0.05, **p < 0.01, ***p < 0.005). Abbreviations: NC, non-treated negative control; WC, whole cells; IB, isolated inclusion body containing MAP after disruption of CaCl2/EDTA-treated whole cells; X-100/100, acetic acid-extracted MAP after inclusion body washing with Triton X-100 twice; X-100/114, acetic acid-extracted MAP after inclusion body washing with Triton X-100 and Triton X-114 in order; X-114/100, acetic acid-extracted MAP after inclusion body washing with Triton X-114 and Triton X-100 in order; X-114/114, acetic acid-extracted MAP after inclusion body washing with Triton X-114 twice; IE: MAP fraction through cation exchange chromatography of acetic acid-extracted solution after inclusion body washing with Triton X-114 twice; ppMAP, purified MAP based on previous method; LPS 1EU, LPS standard with 1 endotoxin unit; LPS 5EU, LPS standard with 5 endotoxin unit; LPS 10EU, LPS standard with 10 endotoxin unit.

Figure 6
figure 6

Assessment of biological safety of purified recombinant MAP using cellular response assays on RAW 264.7 macrophage cells. (A) Cell viability, (B) cytotoxicity, and (C) apoptotic cell death were observed by treating MAP samples at each purification step. The data represent mean +/− standard deviation and were analyzed 2-tails student t-test (*p < 0.05, **p < 0.01, ***p < 0.005). Abbreviations: NC, non-treated negative control; WC, whole cells; IB, isolated inclusion body containing MAP after disruption of CaCl2/EDTA-treated whole cells; X-114/114, acetic acid-extracted MAP after inclusion body washing with Triton X-114 twice; IE: MAP fraction through cation exchange chromatography of acetic acid-extracted solution; ppMAP, purified MAP based on previous method; LPS 1EU, LPS standard with 1 endotoxin unit; LPS 10EU, LPS standard with 10 endotoxin unit.

Conclusions

Here, the establishment of purification process for Gram-negative E. coli-derived recombinant MAP, composed of inclusion body isolation after disruption of multivalent ion CaCl2/chelating agent EDTA-treated cells, acetic acid extraction after inclusion body washing twice with non-ionic surfactant Triton X-114, and ion exchange chromatography purification of acid-extracted solution with cation exchanger, was achieved to secure high purity and biological safety standards. The purity and safety parameters were confirmed by various assays to prove the efficacy of the proposed purification process. LAL assays revealed that the endotoxins were effectively eliminated; HPLC assay and total carbohydrate-lipid amount determination presented notably improved purity; various in vitro macrophage cell tests on inflammatory response and cellular responses such as cell viability, cytotoxicity, and apoptosis confirmed the biological safety of final purified product. This highly purified recombinant MAP with secured biological safety can be successfully used as a promising bioadhesive for in vivo tissue engineering and biomedical applications.

Methods

Expression of recombinant MAP in E. coli

Recombinant fp-151 was produced in E. coli as described previously [13]. In brief, transformed E. coli BL21 (DE3) cells were cultured in 5 L Luria-Bertani (LB) medium supplemented with 50 μg/mL ampicillin (Sigma, St. Louis, MO, USA) using a 10 L bioreactor (KoBiotech, Incheon, Korea) at 37°C and 300 rpm. At optical density 600 nm (OD600) of 0.4–0.6, 1 mM isopropyl-β-D-thiogalactopyranoside (IPTG; Sigma) was added to the broth to induce protein expression, and further cultured for 8 h at 37°C and 300 rpm. After harvesting by centrifugation (Hanil Science Industrial, Incheon, Korea) of culture broth at 9,000 × g for 10 min at 4°C, cell pellets were stored at −80°C for further analysis.

Inclusion body isolation after disruption of CaCl2/EDTA-treated whole cells

Harvested cell pellets containing recombinant fp-151 were washed (resuspended and pelleted) with 15 mL of each washing solution per gram wet weight, in order of 100 mM Tris–HCl (pH 8.0), 5 mM CaCl2 in 100 mM Tris–HCl (pH 8.0), and 10 mM EDTA (Sigma) in 100 mM Tris–HCl (pH 8.0). This washing procedure was repeated three times. In the final cycle of washing steps, cell pellets were resuspended in 15 mL lysis buffer (10 mM Tris–HCl and 100 mM sodium phosphate; pH 8.0) per gram wet weight. Cells were lysed with constant cell-disruption system (Constant Systems, Northants, England) at 20 kpsi. Cell lysates were centrifuged at 9,000 × g for 20 min at 4°C, and cell debris harbouring inclusion body was collected.

Acetic acid extraction after Triton X-114 double washing of inclusion body

The isolated inclusion body was treated with Triton X-114 washing twice. It was suspended in Triton X-114 washing buffer (1% (v/v) Triton X-114 (Sigma), 1 mM EDTA, and 50 mM Tris–HCl; pH 8.0) with 10 mmol phenylmethanesulfonyl fluoride (PMSF; Sigma) and 1 mg/mL lysozyme (Bio Basic Canada Inc., Ontario, Canada), and agitated overnight. After centrifugation, inclusion bodies were resuspended in Triton X-114 washing buffer to remove PMSF and lysozyme. The isolated inclusion bodies were resuspended in 40 mL of 25% (v/v) acetic acid per gram wet weight to specifically extract recombinant fp-151. The extracted solution was centrifuged at 9,000 × g for 20 min at 4°C, and the supernatant was collected, dialyzed in distilled water (DW) with 0.1% (v/v) acetic acid, and freeze-dried.

Ion exchange chromatography purification

For further purification of recombinant fp-151, fast protein liquid chromatography (FPLC; GE Healthcare, Buckinghamshire, UK) system was used. Sample was prepared by dissolving freeze-dried acid-extracted recombinant fp-151 in binding buffer (20 mM sodium acetate; pH 4.0). Then, cationic exchange column (HiTrap SP XL; GE Healthcare) was used for separating fp-151 and impurities through linear gradient of elution buffer (20 mM sodium acetate and 2 M NaCl; pH 4.0) with flow rate of 1 mL/min.

Total protein quantification and SDS-PAGE analysis

Protein recovery of sample at each purification step was quantified by Bradford assay (Bio-Rad, Hercules, CA, USA) and 12% (w/v) SDS-PAGE. Band intensity on SDS-PAGE was analyzed by Gel-Pro Analyzer (Media Cybernetics, Rockville, MD, USA).

LAL assay for endotoxin level determination

After setting the sample quantification to 1 mg/mL, endotoxin levels were determined using the Pierce® LAL Chromogenic Endotoxin Quantitation Kit (Thermo Scientific, Waltham, Massachusetts, USA), which is a quantitative endpoint assay for detection of Gram-negative bacterial endotoxins. The activation of a pro-enzyme in the modified LAL is catalyzed by bacterial endotoxin. A total 50 μL of LAL solution was added to each well of 50 μL sample or standard, and the plates were further incubated for 10 min at 37°C. Then, 100 μL substrate solution was added with 6 min incubation at 37°C followed by addition of 50 μL of 25% (v/v) acetic acid to stop reaction. The absorbance was measured at 410 nm using a microplate absorbance spectrophotometer (Bio-Rad).

Total carbohydrate and lipid amount determination

The phenol-sulfuric acid assay was performed to determine the total quantity of carbohydrates in the samples at each purification step. All samples were freeze-dried and ten milligram of each sample was dissolved in 500 μL of 4% (w/v) phenol (Sigma) and 2.5 mL of 96% (v/v) sulfuric acid (Sigma). 1 mg/mL glucose was used in 5–50 μL of DW for the standard curve, and the optical density was measured at 490 nm. The total quantity of lipids in the samples at each step was analyzed by the sulfo-phospho vanillin colorimetric method. 10 mg of each sample (freeze-dried) was dissolved in chloroform. For the standard curve, 10–100 μg triolein were used. After drying of the chloroform, 100 μL DW was added. The samples were mixed with 2 mL of 96% (v/v) sulfuric acid, boiled for 10 min in a water bath and cooled for 5 min. The phosphoric acid-vanillin reagent was prepared with 85% (v/v) phosphoric acid (Sigma) and 1.2 g/L vanillin (Sigma). After treatment of 5 mL phosphoric acid-vanillin reagent, the samples were warmed at 37°C for 15 min and cooled for 10 min. After the reaction, the value of optical density was measured at 530 nm.

HPLC analysis for protein purity determination

Recombinant fp-151 samples collected before and after ion exchange chromatography were analyzed by HPLC (Gilson, Middleton, WI, USA) with reverse phase Hypersil™ BDS 3 μm C18 column (4.6 × 100 mm; Thermo Scientific). Samples were eluted using a linear gradient of acetonitrile (0–100%, v/v) and HPLC grade water with 0.1% trifluoroacetic acid, and monitored by a UV detector at 280 nm.

In vitro macrophage cell assays

To check inflammatory response of purified recombinant fp-151, expressions of inflammatory cytokines such as TNF-α and IL-6 were measured after treatment of the samples at each purification step on RAW 264.7 mouse macrophage cells. Total 3 × 104 cells were seeded onto 96-well plate and incubated in Dulbecco’s modified Essential Medium (DMEM; Hyclone, Logan, UT, USA) supplemented with 10% (v/v) fetal bovine serum (Hyclone) and penicillin (100 unit/mL; Hyclone)/streptomycin (100 μg/mL; Hyclone) at 37°C under 5% CO2 humid atmosphere. After change of culture media, 4 μg MAP sample was added to the cells in a well and the secretion of inflammatory cytokines was analysed. Detection of expressed TNF-α and IL-6 in culture media was performed with sandwich enzyme-linked immunosorbent assay (ELISA). Capture and detection antibodies for TNF-α and IL-6 and standard recombinant mouse TNF-α and IL-6 were purchased from R&D Systems (Minneapolis, USA). All procedures were following manufacturer’s protocol.

Cell viability, cytotoxicity, and apoptosis were also examined using RAW 264.7 mouse macrophage cells. Total 2 × 104 cells were plated onto 96-well plate and sample treatment was the same than the inflammation assay. Measurements of viability, cytotoxicity, and apoptosis of the cells were performed by ApoTox-Glo™ Triplex Assay (Promega, Madison, WI, USA) as following manufacturer’s protocol.

Abbreviations

MAP:

Mussel adhesive protein

LPS:

Lipopolysaccharide

HPLC:

High performance liquid chromatography

TNF-α:

Tumor necrosis factor-alpha

IL-6:

Interleukin-6

ELISA:

Enzyme-linked immunosorbent assay

LAL:

Limulus amoebocyte lysate

WC:

Whole cells

IB:

Isolated inclusion body containing MAP after disruption of CaCl2/EDTA-treated whole cells

X-114/114:

Acetic acid-extracted MAP after inclusion body washing with Triton X-114 twice

IE:

MAP fraction through cation exchange chromatography of acetic acid-extracted solution

ppMAP:

purified MAP based on previous method.

References

  1. Waite JH: Evidence for a repeating 3, 4-dihydroxyphenylalanine- and hydroxyproline-containing decapeptide in the adhesive protein of the mussel, Mytilus edulis L. J Biol Chem. 1983, 258: 2911-2915.

    Google Scholar 

  2. Kamino K, Inoue K, Maruyama T, Takamatsu N, Harayama S, Shizuri Y: Barnacle cement proteins: importance of disulfide bonds in their insolubility. J Biol Chem. 2000, 275: 27360-27365.

    Google Scholar 

  3. Silverman HG, Roberto FF: Understanding marine mussel adhesion. Mar Biotechnol (NY). 2007, 9: 661-681.

    Article  Google Scholar 

  4. Dove J, Sheridan P: Adhesive protein from mussels: possibilities for dentistry, medicine, and industry. J Am Dent Assoc. 1986, 112: 879-

    Article  Google Scholar 

  5. Waite JH: Adhesion a la moule. Integr Comp Biol. 2002, 42: 1172-1180.

    Article  Google Scholar 

  6. Choi B-H, Choi YS, Kang DG, Kim BJ, Song YH, Cha HJ: Cell behavior on extracellular matrix mimic materials based on mussel adhesive protein fused with functional peptides. Biomaterials. 2010, 31: 8980-8988.

    Article  Google Scholar 

  7. Kim BJ, Choi YS, Cha HJ: Reinforced multifunctionalized nanofibrous scaffolds using mussel adhesive proteins. Angew Chem Int Ed. 2012, 51: 675-678. 10.1002/anie.201105789.

    Article  Google Scholar 

  8. Filpula DR, Lee SM, Link RP, Strausberg SL, Strausberg RL: Structural and functional repetition in a marine mussel adhesive protein. Biotechnol Prog. 1990, 6: 171-177.

    Article  Google Scholar 

  9. Salerno AJ, Goldberg I: Cloning, expression, and characterization of a synthetic analog to the bioadhesive precursor protein of the sea mussel Mytilus edulis. Appl Microbiol Biotechnol. 1993, 39: 221-226.

    Article  Google Scholar 

  10. Hwang DS, Yoo HJ, Jun JH, Moon WK, Cha HJ: Expression of functional recombinant mussel adhesive protein Mgfp-5 in Escherichia coli. Appl Environ Microbiol. 2004, 70: 3352-3359.

    Article  Google Scholar 

  11. Hwang DS, Gim Y, Cha HJ: Expression of functional recombinant mussel adhesive protein type 3A in Escherichia coli. Biotechnol Prog. 2005, 21: 965-970.

    Article  Google Scholar 

  12. Cha HJ, Hwang DS, Lim S: Development of bioadhesives from marine mussels. Biotechnol J. 2008, 3: 631-638.

    Article  Google Scholar 

  13. Hwang DS, Gim Y, Yoo HJ, Cha HJ: Practical recombinant hybrid mussel bioadhesive fp-151. Biomaterials. 2007, 28: 3560-3568.

    Article  Google Scholar 

  14. Wang X, Quinn PJ: Endotoxins: lipopolysaccharides of gram-negative bacteria. Subcell Biochem. 2010, 53: 3-25.

    Article  Google Scholar 

  15. Miernikiewicz P, Owczarek B, Piotrowicz A, Boczkowska B, Rzewucka K, Fiqura G, Letarov A, Kulikov E, Kopciuch A, Switata-Jelen K, Oslizto A, Hodyra K, Gubernator J, Dabrowska K: Recombinant expression and purification of T4 phage Hoc, Soc, gp23, gp24 proteins in native conformations with stability studies. PLoS ONE. 2012, 7: e38902-

    Article  Google Scholar 

  16. Gao BC, Tsan MF: Endotoxin contamination in recombinant human heat shock protein 70 (Hsp70) preparation is responsible for the induction of tumor necrosis factor a release by murine macrophages. J Biol Chem. 2003, 278: 174-179.

    Article  Google Scholar 

  17. Magalhaes PO, Lopes AM, Mazzola PG, Rangel-Yagui C, Penna TCV, Pessoa A: Methods of endotoxin removal from biological preparations: a review. J Pharm Pharm Sci. 2007, 10: 388-404.

    Google Scholar 

  18. Petsch D, Anspach FB: Endotoxin removal from protein solutions. J Biotechnol. 2000, 76: 97-119.

    Article  Google Scholar 

  19. Liu S, Tobias R, McClure S, Styba G, Shi Q, Jackowski G: Removal of endotoxin from recombinant protein preparations. Clin Biochem. 1997, 30: 455-463.

    Article  Google Scholar 

  20. Wilson MJ, Haggart CL, Gallagher SP, Walsh D: Removal of tightly bound endotoxin from biological products. J Biotechnol. 2001, 88: 67-75.

    Article  Google Scholar 

  21. Reichelt P, Schwarz C, Donzeau M: Single step protocol to purify recombinant proteins with low endotoxin contents. Protein Expr Purif. 2006, 46: 483-488.

    Article  Google Scholar 

  22. El-Moghazy ANA: Factors affecting endotoxin removal from aqueous solutions by ultrafiltration process. J Sci Ind Res (India). 2011, 70: 55-59.

    Google Scholar 

  23. Ma R, Zhao J, Du HC, Tian S, Li L-W: Removing endotoxin from plasmid samples by Triton X-114 isothermal extraction. Anal Biochem. 2012, 424: 124-126.

    Article  Google Scholar 

  24. Edelstein C, Pfaffinger D, Scanu AM: Advantages and limitations of density gradient ultracentrifugation in the fractionation of human serum lipoproteins: role of salts and sucrose. J Lipid Res. 1984, 25: 630-637.

    Google Scholar 

  25. Leive L, Shovlin VK, Mergenhagen SE: Physical, chemical, and immunological properties of lipopolysaccharide released from Escherichia coli by ethylenediaminetetraacetate. J Biol Chem. 1968, 243: 6384-6391.

    Google Scholar 

  26. Leive L: The barrier function of the gram-negative envelope. Ann N Y Acad Sci. 1974, 235: 109-129.

    Article  Google Scholar 

  27. Hedhammar M, Bramfeldt H, Baris T, Widhe M, Askarieh G, Nordling K, Aulock SV, Johansson J: Sterilized recombinant spider silk fibers of low pyrogenicity. Biomacromolecules. 2010, 11: 953-959.

    Article  Google Scholar 

  28. Lezin G, Kuehn MR, Brunelli L: Hofmeister series salts enhance purification of plasmid DNA by non-ionic detergents. Biotechnol Bioeng. 2011, 108: 1872-1882.

    Article  Google Scholar 

  29. Aida Y, Pabst MJ: Removal of endotoxin from protein solutions by phase separation using Triton X-114. J Immunol Methods. 1990, 132: 191-195.

    Article  Google Scholar 

  30. Kumar A, Tiwari S, Thavaselvam D, Sathyaseelan K, Prakash A, Barua A, Arora S, Kameswara Rao M: Optimization and efficient purification of recombinant Omp28 protein of Brucella melitensis using Triton X-100 and β-mercaptoethanol. Protein Expr Purif. 2012, 83: 226-232.

    Article  Google Scholar 

Download references

Acknowledgements

This work was supported by the Marine Biotechnology program funded by the Ministry of Oceans and Fisheries, Korea and Rising Star program funded by POSTECH.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Hyung Joon Cha.

Additional information

Competing interests

The authors declare no conflict of interest.

Authors’ contributions

Conception and design of the study: JHS, BHC, YKJ and HC. Acquisition of data: YKJ, HC, SYB and BHC. Analysis and interpretation of data: BHC, YKJ and HC. Drafting the article: HC, BHC and YKJ. Revising it critically for important intellectual content: BHC, YKJ and HC. Final approval of the version to be submitted: all co-authors. All authors read and approved the final manuscript.

Bong-Hyuk Choi, Hogyun Cheong, Yun Kee Jo contributed equally to this work.

Authors’ original submitted files for images

Rights and permissions

Open Access This article is published under license to BioMed Central Ltd. This is an Open Access article is distributed under the terms of the Creative Commons Attribution License ( https://creativecommons.org/licenses/by/2.0 ), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly credited. The Creative Commons Public Domain Dedication waiver ( https://creativecommons.org/publicdomain/zero/1.0/ ) applies to the data made available in this article, unless otherwise stated.

Reprints and permissions

About this article

Cite this article

Choi, BH., Cheong, H., Jo, Y.K. et al. Highly purified mussel adhesive protein to secure biosafety for in vivo applications. Microb Cell Fact 13, 52 (2014). https://doi.org/10.1186/1475-2859-13-52

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1186/1475-2859-13-52

Keywords