Skip to main content

Insertional protein engineering for analytical molecular sensing

Abstract

The quantitative detection of low analyte concentrations in complex samples is becoming an urgent need in biomedical, food and environmental fields. Biosensors, being hybrid devices composed by a biological receptor and a signal transducer, represent valuable alternatives to non biological analytical instruments because of the high specificity of the biomolecular recognition. The vast range of existing protein ligands enable those macromolecules to be used as efficient receptors to cover a diversity of applications. In addition, appropriate protein engineering approaches enable further improvement of the receptor functioning such as enhancing affinity or specificity in the ligand binding. Recently, several protein-only sensors are being developed, in which either both the receptor and signal transducer are parts of the same protein, or that use the whole cell where the protein is produced as transducer. In both cases, as no further chemical coupling is required, the production process is very convenient. However, protein platforms, being rather rigid, restrict the proper signal transduction that necessarily occurs through ligand-induced conformational changes. In this context, insertional protein engineering offers the possibility to develop new devices, efficiently responding to ligand interaction by dramatic conformational changes, in which the specificity and magnitude of the sensing response can be adjusted up to a convenient level for specific analyte species. In this report we will discuss the major engineering approaches taken for the designing of such instruments as well as the relevant examples of resulting protein-only biosensors.

Review

Introduction

Conventional biosensors are hybrid elements consisting of a biochemical receptor for a given analyte, physically coupled to a physicochemical transducer that converts such interaction into a macroscopic, analytically useful signal [1]. In the last decades, many types of biosensors have been under continuous development, integrating biological components such as proteins, nucleic acids, membranes cells and even tissues acting as receptors, and different signal transducers devices including microbalances, electrodes, optical components and semiconductors. Such instruments have been applied into a diversity of fields but specially for the detection of contaminants in foods and environment [2]. More recently, and pressured by the need of more sensitive and specific detection tools for biomedical applications, in particular diagnosis, new types of protein-only biosensors are being explored [3], that contain both the receptor and transducer elements in a single polypeptide chain. Alternatively, protein-only sensors can specifically act as receptors that exploit the whole living cell where they are synthesised, as a complex signal transducer, enabling the detection of the analyte through intricate global activities such as differential growth or support of viral multiplication among others. Both type of protein-only biosensors offer very appealing advantages over classical devices. First, chemical coupling to the signal transducer is not required as straightforward bioproduction results in a ready-to-use final product, either a purified protein of protein-producing cells or cell extracts. Also, protein engineering procedures such as site-directed mutagenesis or directed molecular evolution allow refining the specificity of ligand binding and permit the development of new receptors for new analytes, as demanded from medicine or industry.

The mechanics for which a protein responds to a specific ligand in a macroscopically detectable way would generally imply variations in its activity, either enhancement or inhibition, that could be detectable either directly or indirectly through a biological amplification process. In general, natural protein-ligand interactions result in moderate conformational modifications that would be poorly useful in molecular switching, as they have a limited impact on protein's activity. Protein engineering allows the modification of the receptor in a way in which the interaction with the analyte promotes profound conformational modifications. There are many examples of useful intracellular indicators of molecular interactions, gene expression or for biological screening [4] that use at different extent end-to-end fusion proteins, including two-hybrid systems [5], fluorescence resonance energy transfer (FRET) [6], and protein fragment complementation [7] among others. However, insertional protein engineering allows a more versatile combination of functional modules for the construction of highly responsive mosaic proteins exhibiting unusual conformational versatility upon ligand binding [8, 9]. Obviously, the protein segment or domain acting as a receptor element must be conveniently displayed on the protein surface to allow a proper interaction with the analyte. Although some of the constructs referenced below derive from random insertions and further selection [10, 11], the previous identification of solvent-exposed permissive sites through different procedures has allowed a more rational designing procedures based on site directed peptide insertion for the construction of biosensors and other type of multifunctional proteins [1219]. The principles of protein functionality supporting insertional approaches for biosensor construction are further discussed as exemplified by representative models and specific applications, being most of the resulting protein-only biosensors based on either cleavable (Figure 1A) or allosteric (Figure 1B) protein platforms. Representative examples of specific sensors and construction approaches are listed in Table 1.

Figure 1
figure 1

The biosensing principles of the constructs listed in Table 1 are summarized here as split in two groups. In a), the sensing principles underlying cleavable platforms are presented in which simple hydrolysis of protease target site-bearing hybrid proteins by an effector protease (P) result in a macroscopic signal. Among others, variations of the migration pattern, enzyme activation or inactivation, repressor inactivation, enhanced fluorescence by removal of a quencher or dual fluorescence emission by FRET modulation. In b), a ligand (L) promotes conformational modifications in the sensor either multimerization, correct folding or allosteric activation. A few enzyme biosensors are inactivated in presence of the ligand probably by steric hindrance of the active site.

Table 1 Representative examples of protein only biosensors obtained by insertional mutagenesis.

Cleavable platforms

The most dramatic conformational modification that a given ligand (in this case a protease) might induce on a target protein is hydrolysis, that mostly result in its functional inactivation but being sometimes a requisite for a polypeptide reaching the active form, if existing as an inactive precursor. In fact, targeted proteolysis is a biological principle regulating many complex cellular events [2022]. Therefore, including a specific protease target site on a protein's surface would made it susceptible to site-limited digestion resulting in detectable changes in its electrophoretic pattern. The successful implementation of such technology would imply a refined analysis of the protease target site susceptibility, as peptide display in different solvent-exposed sites could result in distinguishable digestion efficiencies, since the protein regions neighbouring the insert seem to have a dramatic influence on the peptide conformation [23]. This has been exemplified by the insertional mutagenesis of the protease resistant, green fluorescent protein (GFP), to make it susceptible to trypsin and other proteolytic enzymes [24]. The detection of specific proteases and proteolytic activities is now of extreme relevance in virology and in particular for designing antiviral drugs that inhibit viral protein processing and therefore multiplication. Beyond the straightforward electrophoretic analysis of the sensing protein [25], a rather inconvenient technique from the analytical point of view, monitoring protease-mediated reduction of activity (fluorescence emission or enzymatic activity) would offer a more convenient protease sensing signal [26]. In a step further, it is known that many natural proteins are proteolytically activated by the removal of self inhibitory protein domains [27]. In this context, the convenient insertional engineering of the carboxy terminus of p53, containing such a regulatory element, has resulted in a set of p53 variants that are activated upon its removal mediated by either the lethal factor (LF) or the human immunodeficiency virus (HIV) protease [28]. Again, in this case, the sensing signal is detectable by up-shift electrophoretic analysis, since the activated p53 gains the ability to interact with specific DNA sequences [28].

In an attempt to produce more convenient analytical signals, protease target sites have been introduced in the linker between two end-to-end fused proteins that emit fluorescence at different wavelengths, so the cleavage can be monitored by variations in the FRET spectra [2931]. Although being not a standard insertional approach, the principles governing such engineering processes are similar to those discussed above. In this context, the protein hydrolysis splitting a fluorophore and its quencher has been also a successfully proven biosensing principle [60].

It would be expected that the generation of a signal by a specific proteolytic attack acted as an all-or-nothing switcher rather than as a fine sensing tool. However, a very discriminative monitoring tool for viral proteases activity was implemented as a high-throughput analytical method for antiviral drug testing and evaluation of the enzyme activity. The cI lytic repressor of the E. coli lambda bacteriophage has been engineered to accommodate a selected target site for proteases from either HIV [32], hepatitis C virus (HCV) [33] and severe acute respiratory syndrome (SARS) viruses [34]. The appropriate co-expression of the engineered cI and the protease promotes lytic lambda propagation that is reported by plaque counting. This system serves not only to test protease inhibitors for antiviral drug research but also to quantitatively evaluate the activity of proteases from mutant viruses emerging in patients treated with antiviral, protease-targeted drugs [35]. The cascade events supported by the cell as a network signal transducer permits the quantitative translation of the statistic cI hydrolysis within the cellular pool, what would be probably not possible by using a more straightforward signal transducing system.

Allosteric platforms

The regulatable activity of allosteric enzymes lies on a biological principle highly matching with the protein-only biosensing concept [36]. The activity of allosteric enzymes is modulated upon binding of an effector to a receptor site, that being different from the active site, can influence its performance through the conformational impact promoted by the allosteric effector. Since most natural effectors are irrelevant for analytical purposes, both allosteric and non allosteric enzymes have been engineered to allosterically respond to new effectors by insertion of appropriate receptor sites, in some cases accompanied by directed or random mutagenesis of the enzyme or directed molecular evolution. This straightforward insertional strategy often requires the identification of permissive sites in which inserted motives do not disturb irreversibly the enzyme activity [12, 37], and has proven to be efficient in the engineering of β-galactosidase [38, 39], alkaline phosphatase [40], β-lactamase [10] and GFP [41, 42] as allosteric biosensors. As the fine mechanics of the conformational signal transduction in allosteric activation is not know, such devices have been constructed by error-and-trial approaches. Recently [11], a random insertional approach has permitted to newly create two allosteric enzymes by domain incorporation, by a strategy, in principle, with general applicability in biosensor design. Among enzyme inhibitors and other few ligand species that activate allosteric biosensors, antibodies have been noted to be specially efficient allosteric effectors [36] and the use of antigenic peptides as receptors in only-protein biosensors would offer appealing tools for the fast molecular diagnosis of infectious diseases [39, 43]. Allosteric β-galactosidases displaying arginine-glycine-aspartic acid (RGD)-containing antigenic peptides [23], are activated by anti-peptide antibodies [38] but not by RGD-targeted integrins binding the same receptor [44]. This fact indicates different conformational constraints in the binding of both molecules [45] and suggests that the adaptive antibody binding could be a major force in sensor activation.

A main problem of allosteric biosensing is the poor signal-background ratio, that in most of cases does not reach more than 2-fold (Table 1). Higher activation factors would be extremely desirable for fine analytical applications where a wide dynamic range is required. In fact, in a few examples, the presence of anti-peptide antibodies (the analyte) even reduces the activity of the enzyme probably by steric hindrance of the active site, as reported by alkaline phosphatase [46] or β-lactamase [10], when the antigenic peptide was placed in the very close vicinity of the active site. The inhibition of the enzymatic activity is not very desirable as an analytical signal since in high-throughput analysis of complex samples, the presence of enzyme inhibitors might render false positives. By comparing different species of allosteric biosensors sensing anti-peptide antibodies, it was recognized that the activation factor was highly depending on the perturbation that the inserted peptide receptor had promoted on the activity of the enzyme platform after insertion [47]. Greater was the reduction in the specific activity of the enzyme, higher the activation mediated by the effector, but reaching only activation factors around 2 that seemed to be a biological upper limit to allosteric activation [47]. However, a deeper exploration of β-galactosidase allosteric sensors has revealed that the signal background ratio can be enhanced up to more than 10-fold, by alternative or combined approaches such as introducing a higher number of receptors per enzyme [43, 48], optimising the reaction conditions [49] and selecting the appropriate substrate [50].

Apart from plain diagnostic utilities, allosteric sensors can intriguingly perform as tools for the analysis of the immune response, as they specially recognize antibodies with a high potential as modifiers of the epitope conformation. In this context, a β-galactosidase sensor displaying an HIV gp41 epitope and responsive to human HIV-immune sera is preferentially activated by the IgG4 antibody subpopulation [51]. As at least in the case of HIV infection the ability of anti-viral antibodies to modify the epitope's conformation is strongly related to their neutralizing activity [52, 53] and probably to the progression of the infection [54], allosteric biosensing could eventually offer a valuable instrument for high-throughput sera analysis for prognostic investigation.

Other examples of conformation-dependent sensor activation

Conformational changes promoted by molecular interactions may generate signals suitable for biosensing other than allosteric responses. The correct folding of a deletion mutant of the human Fyn tyrosine kinase (FynSH3), a predominantly β-sheet protein, is induced by the binding of an appropriate proline-rich peptide ligand, and the folding process monitored in real time by tryptophan fluorescence [55]. Temperature-sensitive yeast cells lacking dihydropholate reductase (DHFR) are complemented by two mouse DHFR containing foreign different ligand binding domains [56]. Culture growth is then enhanced in presence of the respective ligands proving that molecular binding activates the complementing enzyme. Although this system can be observed as a generic biosensor [57], its real potential would lie on the selection of specific or improved ligands by directed molecular-cellular evolution. On the other hand, the presence of bivalent antibodies can promote dimer formation of a mutant p53 in which the tetramerization domain has been removed and antigenic B-cell epitopes of viral origin conveniently inserted [28]. Since dimers are much more active than monomers, the presence of antiviral antibodies enables p53 to bind DNA in an electrophoretically detectable manner.

Other conformation-linked effects of molecular interactions might also result in detectable activity changes or phenotypes acting as macroscopic signals for a given analyte. Gaining further knowledge about enzyme structure and dynamics would necessarily offer additional possibilities of rational protein engineering [58] for exploitation of such conformational signals.

Conclusion

Insertion of foreign peptides as receptors of protein-only biosensors confers the resulting protein construct the ability to sense analytes by dramatic conformational changes unusual in the native, non engineered protein. For such a sensor being efficiently responsive, appropriated permissive sites need to be selected permitting proper receptor display and signal transduction, and the whole protein might require further engineering to gain specificity and response range. Although most protein-only biosensors derive from trial-and-error engineering approaches, rational and very clever setting-ups are exemplified by combinations of sensing protein segments and conveniently modified acceptor proteins. Among the diversity of sensing strategies based on insertional mutagenesis two protein platforms emerge as the most explored, namely cleavable sensors responding to proteases or their inhibitors, and allosteric, among whose most efficient effectors are antibodies. The performance of these two sensor types has been largely proved in the high throughput screening of antiviral drugs and for the molecular diagnosis of infectious diseases respectively. Although the potential applications of protein-only biosensors are diverse and still have to be fully exploited, they have arisen as valuable new tools in biomedicine being intriguing alternatives to classical sensing technologies.

Abbreviations

DHFR:

Dihydropholate reductase

DsRed :

Engineered mutant of red fluorescent protein

EGFP:

Enhanced green fluorescent protein

FMDV:

Food-and-mouth disease virus

FRET:

Fluorescence resonance energy transfer

GFP:

Green fluorescent protein

HA:

Influenza hemaglutinin

HCV:

Hepatitis C virus

HIV:

Human immunodeficiency virus

HSV:

Herpes simplex virus

LA:

Lipid A

LF:

Lethal factor

LPS:

Lipopolysaccharide

MBP:

Maltose binding protein

RGD:

Arginine-glycine-aspartic acid tri-peptide

SARS:

Severe acute respiratory syndrome

TEV:

Tobacco etch virus

TEM:

β lactamase

PSA:

Prostate specific antigen

References

  1. Thevenot DR, Toth K, Durst RA, Wilson GS: Electrochemical biosensors: recommended definitions and classification. Biosens Bioelectron. 2001, 16: 121-131. 10.1016/S0956-5663(01)00115-4.

    Article  CAS  Google Scholar 

  2. Rich RL, Myszka DG: Survey of the year 2004 commercial optical biosensor literature. J Mol Recognit. 2005, 18: 431-478. 10.1002/jmr.753.

    Article  CAS  Google Scholar 

  3. Cooper MA: Biosensor profiling of molecular interactions in pharmacology. Curr Opin Pharmacol. 2003, 3: 557-562. 10.1016/j.coph.2003.05.003.

    Article  CAS  Google Scholar 

  4. Piehler J: New methodologies for measuring protein interactions in vivo and in vitro. Curr Opin Struct Biol. 2005, 15: 4-14. 10.1016/j.sbi.2005.01.008.

    Article  CAS  Google Scholar 

  5. Toby GG, Golemis EA: Using the yeast interaction trap and other two-hybrid-based approaches to study protein-protein interactions. Methods. 2001, 24: 201-217. 10.1006/meth.2001.1182.

    Article  CAS  Google Scholar 

  6. Yan Y, Marriott G: Analysis of protein interactions using fluorescence technologies. Curr Opin Chem Biol. 2003, 7: 635-640. 10.1016/j.cbpa.2003.08.017.

    Article  CAS  Google Scholar 

  7. Obrdlik P, El Bakkoury M, Hamacher T, Cappellaro C, Vilarino C, Fleischer C, Ellerbrok H, Kamuzinzi R, Ledent V, Blaudez D, Sanders D, Revuelta JL, Boles E, Andre B, Frommer WB: K+ channel interactions detected by a genetic system optimized for systematic studies of membrane protein interactions. Proc Natl Acad Sci U S A. 2004, 101: 12242-12247. 10.1073/pnas.0404467101.

    Article  CAS  Google Scholar 

  8. Doi N, Yanagawa H: Insertional gene fusion technology. FEBS Lett. 1999, 457: 1-4. 10.1016/S0014-5793(99)00991-6.

    Article  CAS  Google Scholar 

  9. Ostermeier M: Engineering allosteric protein switches by domain insertion. Protein Eng Des Sel. 2005, 18: 359-364. 10.1093/protein/gzi048.

    Article  CAS  Google Scholar 

  10. Legendre D, Soumillion P, Fastrez J: Engineering a regulatable enzyme for homogeneous immunoassays. Nat Biotechnol. 1999, 17: 67-72. 10.1038/5243.

    Article  CAS  Google Scholar 

  11. Guntas G, Ostermeier M: Creation of an allosteric enzyme by domain insertion. J Mol Biol. 2004, 336: 263-273. 10.1016/j.jmb.2003.12.016.

    Article  CAS  Google Scholar 

  12. Feliu JX, Villaverde A: Engineering of solvent-exposed loops in Escherichia coli beta-galactosidase. FEBS Lett. 1998, 434: 23-27. 10.1016/S0014-5793(98)00943-0.

    Article  CAS  Google Scholar 

  13. Hiraga K, Yamagishi A, Oshima T: Mapping of unit boundaries of a protein: exhaustive search for permissive sites for duplication by complementation analysis of random fragment libraries of tryptophan synthase alpha subunit. J Mol Biol. 2004, 335: 1093-1104. 10.1016/j.jmb.2003.11.029.

    Article  CAS  Google Scholar 

  14. Charbit A, Ronco J, Michel V, Werts C, Hofnung M: Permissive sites and topology of an outer membrane protein with a reporter epitope. J Bacteriol. 1991, 173: 262-275.

    CAS  Google Scholar 

  15. Martineau P, Guillet JG, Leclerc C, Hofnung M: Expression of heterologous peptides at two permissive sites of the MalE protein: antigenicity and immunogenicity of foreign B-cell and T-cell epitopes. Gene. 1992, 113: 35-46. 10.1016/0378-1119(92)90667-E.

    Article  CAS  Google Scholar 

  16. Manoil C, Bailey J: A simple screen for permissive sites in proteins: analysis of Escherichia coli lac permease. J Mol Biol. 1997, 267: 250-263. 10.1006/jmbi.1996.0881.

    Article  CAS  Google Scholar 

  17. Coeffier E, Clement JM, Cussac V, Khodaei-Boorane N, Jehanno M, Rojas M, Dridi A, Latour M, El Habib R, Barre-Sinoussi F, Hofnung M, Leclerc C: Antigenicity and immunogenicity of the HIV-1 gp41 epitope ELDKWA inserted into permissive sites of the MalE protein. Vaccine. 2000, 19: 684-693. 10.1016/S0264-410X(00)00267-X.

    Article  CAS  Google Scholar 

  18. Aris A, Villaverde A: Modular protein engineering for non-viral gene therapy. Trends Biotechnol. 2004, 22: 371-377. 10.1016/j.tibtech.2004.05.004.

    Article  CAS  Google Scholar 

  19. Bckstrom M, Holmgren J, Schodel F, Lebens M: Characterization of an internal permissive site in the cholera toxin B-subunit and insertion of epitopes from human immunodeficiency virus-1, hepatitis B virus and enterotoxigenic Escherichia coli. Gene. 1995, 165: 163-171. 10.1016/0378-1119(95)00444-B.

    Article  CAS  Google Scholar 

  20. Ehrmann M, Clausen T: Proteolysis as a regulatory mechanism. Annu Rev Genet. 2004, 38: 709-724. 10.1146/annurev.genet.38.072902.093416.

    Article  CAS  Google Scholar 

  21. Goulet B, Nepveu A: Complete and limited proteolysis in cell cycle progression. Cell Cycle. 2004, 3: 986-989.

    Article  CAS  Google Scholar 

  22. Hilt W: Targets of programmed destruction: a primer to regulatory proteolysis in yeast. Cell Mol Life Sci. 2004, 61: 1615-1632.

    Article  CAS  Google Scholar 

  23. Benito A, Mateu MG, Villaverde A: Improved mimicry of a foot-and-mouth disease virus antigenic site by a viral peptide displayed on beta-galactosidase surface. Biotechnology (N Y). 1995, 13: 801-804. 10.1038/nbt0895-801.

    Article  CAS  Google Scholar 

  24. Chiang CF, Okou DT, Griffin TB, Verret CR, Williams MN: Green fluorescent protein rendered susceptible to proteolysis: positions for protease-sensitive insertions. Arch Biochem Biophys. 2001, 394: 229-235. 10.1006/abbi.2001.2537.

    Article  CAS  Google Scholar 

  25. Baum EZ, Bebernitz GA, Gluzman Y: beta-Galactosidase containing a human immunodeficiency virus protease cleavage site is cleaved and inactivated by human immunodeficiency virus protease. Proc Natl Acad Sci U S A. 1990, 87: 10023-10027.

    Article  CAS  Google Scholar 

  26. Vera A, Aris A, Daura X, Martinez MA, Villaverde A: Engineering the E. coli beta-galactosidase for the screening of antiviral protease inhibitors. Biochem Biophys Res Commun. 2005, 329: 453-456. 10.1016/j.bbrc.2005.01.147.

    Article  CAS  Google Scholar 

  27. Pufall MA, Graves BJ: Autoinhibitory domains: modular effectors of cellular regulation. Annu Rev Cell Dev Biol. 2002, 18: 421-462. 10.1146/annurev.cellbio.18.031502.133614.

    Article  CAS  Google Scholar 

  28. Geddie ML, O'Loughlin TL, Woods KK, Matsumura I: Rational design of p53, an intrinsically unstructured protein, for the fabrication of novel molecular sensors. J Biol Chem. 2005, 280: 35641-35646. 10.1074/jbc.M508149200.

    Article  CAS  Google Scholar 

  29. Kohl T, Heinze KG, Kuhlemann R, Koltermann A, Schwille P: A protease assay for two-photon crosscorrelation and FRET analysis based solely on fluorescent proteins. Proc Natl Acad Sci U S A. 2002, 99: 12161-12166. 10.1073/pnas.192433499.

    Article  CAS  Google Scholar 

  30. Zhang B: Design of FRET-based GFP probes for detection of protease inhibitors. Biochem Biophys Res Commun. 2004, 323: 674-678. 10.1016/j.bbrc.2004.08.143.

    Article  CAS  Google Scholar 

  31. Nagai T, Miyawaki A: A high-throughput method for development of FRET-based indicators for proteolysis. Biochem Biophys Res Commun. 2004, 319: 72-77. 10.1016/j.bbrc.2004.04.147.

    Article  CAS  Google Scholar 

  32. Goh YY, Frecer V, Ho B, Ding JL: Rational design of green fluorescent protein mutants as biosensor for bacterial endotoxin. Protein Eng. 2002, 15: 493-502. 10.1093/protein/15.6.493.

    Article  CAS  Google Scholar 

  33. Martinez MA, Cabana M, Parera M, Gutierrez A, Este JA, Clotet B: A bacteriophage lambda-based genetic screen for characterization of the activity and phenotype of the human immunodeficiency virus type 1 protease. Antimicrob Agents Chemother. 2000, 44: 1132-1139. 10.1128/AAC.44.5.1132-1139.2000.

    Article  CAS  Google Scholar 

  34. Martinez MA, Clotet B: Genetic screen for monitoring hepatitis C virus NS3 serine protease activity. Antimicrob Agents Chemother. 2003, 47: 1760-1765. 10.1128/AAC.47.5.1760-1765.2003.

    Article  CAS  Google Scholar 

  35. Parera M, Clotet B, Martinez MA: Genetic screen for monitoring severe acute respiratory syndrome coronavirus 3C-like protease. J Virol. 2004, 78: 14057-14061. 10.1128/JVI.78.24.14057-14061.2004.

    Article  CAS  Google Scholar 

  36. Cabana M, Fernandez G, Parera M, Clotet B, Martinez MA: Catalytic efficiency and phenotype of HIV-1 proteases encoding single critical resistance substitutions. Virology. 2002, 300: 71-78. 10.1006/viro.2002.1520.

    Article  CAS  Google Scholar 

  37. Villaverde A: Allosteric enzymes as biosensors for molecular diagnosis. FEBS Lett. 2003, 554: 169-172. 10.1016/S0014-5793(03)01160-8.

    Article  CAS  Google Scholar 

  38. Benito A, Villaverde A: Insertion of a 27 amino acid viral peptide in different zones of Escherichia coli beta-galactosidase: effects on the enzyme activity. FEMS Microbiol Lett. 1994, 123: 107-112.

    CAS  Google Scholar 

  39. Benito A, Feliu JX, Villaverde A: Beta-galactosidase enzymatic activity as a molecular probe to detect specific antibodies. J Biol Chem. 1996, 271: 21251-21256. 10.1074/jbc.271.35.21251.

    Article  CAS  Google Scholar 

  40. Ferrer-Miralles N, Feliu JX, Vandevuer S, Muller A, Cabrera-Crespo J, Ortmans I, Hoffmann F, Cazorla D, Rinas U, Prevost M, Villaverde A: Engineering regulable Escherichia coli beta-galactosidases as biosensors for anti-HIV antibody detection in human sera. J Biol Chem. 2001, 276: 40087-40095. 10.1074/jbc.M104704200.

    Article  CAS  Google Scholar 

  41. Brennan CA, Christianson K, La Fleur MA, Mandecki W: A molecular sensor system based on genetically engineered alkaline phosphatase. Proc Natl Acad Sci U S A. 1995, 92: 5783-5787.

    Article  CAS  Google Scholar 

  42. Doi N, Yanagawa H: Design of generic biosensors based on green fluorescent proteins with allosteric sites by directed evolution. FEBS Lett. 1999, 453: 305-307. 10.1016/S0014-5793(99)00732-2.

    Article  CAS  Google Scholar 

  43. Doi N, Yanagawa H: Evolutionary design of generic green fluorescent protein biosensors. Methods Mol Biol. 2002, 183: 49-55.

    CAS  Google Scholar 

  44. Feliu JX, Ferrer-Miralles N, Blanco E, Cazorla D, Sobrino F, Villaverde A: Enhanced response to antibody binding in engineered beta-galactosidase enzymatic sensors. Biochim Biophys Acta. 2002, 1596: 212-224.

    Article  CAS  Google Scholar 

  45. Alcala P, Feliu JX, Aris A, Villaverde A: Efficient accommodation of recombinant, foot-and-mouth disease virus RGD peptides to cell-surface integrins. Biochem Biophys Res Commun. 2001, 285: 201-206. 10.1006/bbrc.2001.5157.

    Article  CAS  Google Scholar 

  46. Feliu JX, Benito A, Oliva B, Aviles FX, Villaverde A: Conformational flexibility in a highly mobile protein loop of foot-and-mouth disease virus: distinct structural requirements for integrin and antibody binding. J Mol Biol. 1998, 283: 331-338. 10.1006/jmbi.1998.2104.

    Article  CAS  Google Scholar 

  47. Brennan C, Christianson K, Surowy T, Mandecki W: Modulation of enzyme activity by antibody binding to an alkaline phosphatase-epitope hybrid protein. Protein Eng. 1994, 7: 509-514.

    Article  CAS  Google Scholar 

  48. Ferrer-Miralles N, Feliu JX, Villaverde A: Molecular mechanisms for antibody-mediated modulation of peptide-displaying enzyme sensors. Biochem Biophys Res Commun. 2000, 275: 360-364. 10.1006/bbrc.2000.3309.

    Article  CAS  Google Scholar 

  49. Cazorla D, Feliu JX, Ferrer-Miralles N, Villaverde A: Tailoring molecular sensing for peptide displaying engineered enzymes. Biotechnology Letters. 2002, 24: 467-477. 10.1023/A:1014590324002.

    Article  Google Scholar 

  50. Ferraz RM, Aris A, Villaverde A: Profiling the allosteric response of an engineered beta-galactosidase to its effector, anti-HIV antibody. Biochem Biophys Res Commun. 2004, 314: 854-860. 10.1016/j.bbrc.2003.12.169.

    Article  CAS  Google Scholar 

  51. Ferraz RM, Aris A, Villaverde A: Enhanced molecular recognition signal in allosteric biosensing by proper substrate selection. Biotechnol Bioeng. 2006, 94 (1): 193-9. 10.1002/bit.20798.

    Article  CAS  Google Scholar 

  52. Ferraz RM, Aris A, Martinez MA, Villaverde A: High-throughput, functional screening of the anti-HIV-1 humoral response by an enzymatic nanosensor. Mol Immunol. 2006, 43 (13): 2119-23. 10.1016/j.molimm.2005.12.012.

    Article  CAS  Google Scholar 

  53. de Rosny E, Vassell R, Jiang S, Kunert R, Weiss CD: Binding of the 2F5 monoclonal antibody to native and fusion-intermediate forms of human immunodeficiency virus type 1 gp41: implications for fusion-inducing conformational changes. J Virol. 2004, 78: 2627-2631. 10.1128/JVI.78.5.2627-2631.2004.

    Article  CAS  Google Scholar 

  54. Kwong PD, Doyle ML, Casper DJ, Cicala C, Leavitt SA, Majeed S, Steenbeke TD, Venturi M, Chaiken I, Fung M, Katinger H, Parren PW, Robinson J, Van Ryk D, Wang L, Burton DR, Freire E, Wyatt R, Sodroski J, Hendrickson WA, Arthos J: HIV-1 evades antibody-mediated neutralization through conformational masking of receptor-binding sites. Nature. 2002, 420: 678-682. 10.1038/nature01188.

    Article  CAS  Google Scholar 

  55. Wei X, Decker JM, Wang S, Hui H, Kappes JC, Wu X, Salazar-Gonzalez JF, Salazar MG, Kilby JM, Saag MS, Komarova NL, Nowak MA, Hahn BH, Kwong PD, Shaw GM: Antibody neutralization and escape by HIV-1. Nature. 2003, 422: 307-312. 10.1038/nature01470.

    Article  CAS  Google Scholar 

  56. Kohn JE, Plaxco KW: Engineering a signal transduction mechanism for protein-based biosensors. Proc Natl Acad Sci U S A. 2005, 102: 10841-10845. 10.1073/pnas.0503055102.

    Article  CAS  Google Scholar 

  57. Tucker CL, Fields S: A yeast sensor of ligand binding. Nat Biotechnol. 2001, 19: 1042-1046. 10.1038/nbt1101-1042.

    Article  CAS  Google Scholar 

  58. Vidan S, Snyder M: Making drug addicts out of yeast. Nat Biotechnol. 2001, 19: 1022-1023. 10.1038/nbt1101-1022.

    Article  CAS  Google Scholar 

  59. Agarwal PK: Enzymes: An integrated view of structure, dynamics and function. Microb Cell Fact. 2006, 5: 2-10.1186/1475-2859-5-2.

    Article  Google Scholar 

  60. Feliu JX, Ramirez E, Villaverde A: Distinct mechanisms of antibody-mediated enzymatic reactivation in beta-galactosidase molecular sensors. FEBS Lett. 1998, 438: 267-271. 10.1016/S0014-5793(98)01315-5.

    Article  CAS  Google Scholar 

  61. Marvin JS, Hellinga HW: Conversion of a maltose receptor into a zinc biosensor by computational design. Proc Natl Acad Sci U S A. 2001, 98: 4955-4960. 10.1073/pnas.091083898.

    Article  CAS  Google Scholar 

Download references

Acknowledgements

The authors appreciate the predoctoral fellowships received by RMF and AV (from AGAUR and UAB, respectively) for their work on allosteric biosensing and development of cleavable platforms respectively. The research performed in our laboratory on these topics has been founded through grants BIO2004-00700 (from MEC, Spain) and 2005SGR-00956 (from AGAUR, Catalonia, Spain).

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Antonio Villaverde.

Additional information

Authors' contributions

Rosa M Ferraz and Andrea Vera have equally contributed to this review.

Authors’ original submitted files for images

Below are the links to the authors’ original submitted files for images.

Authors’ original file for figure 1

Rights and permissions

Open Access This article is published under license to BioMed Central Ltd. This is an Open Access article is distributed under the terms of the Creative Commons Attribution License ( https://creativecommons.org/licenses/by/2.0 ), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Reprints and permissions

About this article

Cite this article

Ferraz, R.M., Vera, A., Arís, A. et al. Insertional protein engineering for analytical molecular sensing. Microb Cell Fact 5, 15 (2006). https://doi.org/10.1186/1475-2859-5-15

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1186/1475-2859-5-15

Keywords